1. Manuals
  2. Brands
  3. Sony Manuals
  4. Printer
  5. DMP-1000P
  6. Service manual

Sony DMP-1000P Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

SERVICE MANUAL

Printer Section
Printer section
Printing system
Sublimation dye transfer printing
(Yellow/Magenta/Cyan 3 pass)
1,376 (H) × 1,024 (V) dot
Effective pixels
114 (H) × 85 (V) mm (maximum)
Printing size
(4
Gradations
256 levels (8 bits), per colour (24 bits)
Approx. 16,770,000 colours
Printing time (excluding data transmission time)
Approx. 100 seconds per sheet
Input/output connectors
VIDEO INPUT connector (phono jack
× 1)
S VIDEO INPUT connector
VIDEO OUTPUT connector
3.5" Floppy disk drive
Print cartridge and Print paper (100 × 140 mm (4 × 5
DPM-50STA (Standard papers)
Power requirements
220 - 240 V AC, 50/60 Hz, 0.6 A
Power consumption
72 W (printing)
13 W (stand by mode)
9-928-154-11
SPECIFICATIONS
× 3
1
3
/
/
inches)
2
8
1 Vp-p, 75 ohms (unbalanced),
sync nagative
(4-pin mini-DIN × 1)
Y: 1 Vp-p, 75 ohms (unbalanced),
sync negative
C: 0.286 Vp-p (colour burst),
75-ohms (unbalanced)
(phono jack × 1)
1 Vp-p, 75 ohms (unbalanced),
sync negative
5
/
inches))
8
DMP-1000P
Automatic Feeder Section
5 °C to 35 °C (41 °F to 95 °F)
Operating temperature
Approx. 301 × 83 × 246 mm
Dimensions
(w/h/d, excluding protruding parts)
(12 × 3
Mass
Approx. 3 kg (6 lb 10 oz)
Supplied accessories
AC power cord (1)
Automatic feeder (1)
Video connecting cable (1)
BNC-PIN cable adapter (2)
Instruction Manual (1)
Warranty (1)
Automatic feeder section
Maximum Printing Quantity
25 sheets
(1, 2, 3, 4, 5, 10, 25 selectable)
Print paper
VP-standard print paper
(100 × 140 mm (4 × 5
cut paper)
5 °C to 35 °C (41 °F to 95 °F)
Operating temperatures
Approx. 149 × 32 × 185 mm
Dimensions
(5
excluding projecting parts
Mass
Approx. 360 g (13 oz)
Design and specifications are subject to change without notice.
COLOUR PRINTER
AEP Model
× 9
3
7
/
/
inches)
8
8
5
/
inches) (v/h),
8
× 1
× 7
7
5
3
/
/
/
inches) (w/h/d)
8
16
8

Advertisement

Table of Contents
loading

Related Manuals for Sony DMP-1000P

Summary of Contents for Sony DMP-1000P

  • Page 1: Service Manual

    DMP-1000P SERVICE MANUAL AEP Model Automatic Feeder Section Printer Section SPECIFICATIONS 5 °C to 35 °C (41 °F to 95 °F) Printer section Operating temperature Approx. 301 × 83 × 246 mm Dimensions Printing system Sublimation dye transfer printing (Yellow/Magenta/Cyan 3 pass) (w/h/d, excluding protruding parts) 1,376 (H) ×...

  • Page 2: Table Of Contents

    LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- LISHED BY SONY.

  • Page 3: General

    Television printer, the video Set input selector to equipment and “VIDEO.” television. : Signal flow • See also to the instruction manuals for the video equipment. Setting Up Setting Up Confidential DMP-1000P (AEP)

  • Page 4: Adjusting The Clock

    Fingerprints or dust on may not be obtained, or the ink ribbon may Remove the print cartridge, and then re-insert it. paper jam or other trouble result in imperfect may occur. printing. continued Setting Up Setting Up Confidential DMP-1000P (AEP)

  • Page 5: Inserting The Print Paper

    • The paper may not be Insert the desired number loaded automatically if Less than 2 cm of sheets and set the dial you do not insert the to 25. paper firmly. Setting Up Setting Up Confidential DMP-1000P (AEP)
  • Page 6 If you press CLEAR ALL, the printer is reset to stand by mode. Print the still image VIDEO STILL Perform printing procedures from the beginning. continued Printing Printing Confidential DMP-1000P (AEP)

  • Page 7: Printing

    Printing multiple images continuously the paper supply image may not You can print multiple images continuously up to 25 indicator flash. correspond with the sheets using the supplied automatic feeder. Insert the print paper. actual print in details. Printing Printing Confidential DMP-1000P (AEP)

  • Page 8: Making Various Prints

    If you want to make other same image prints, You can print the date the actual print image is when the image was displayed, only the repeat step 1. saved by setting DATE to displayed image is “ON.” printed. Making Various Prints Making Various Prints Confidential DMP-1000P (AEP)

  • Page 9: Making A Mirror Image Print

    If you want to write greetings or draw You can print the date on the printing surface when the image was after printing, use an oil saved by setting DATE to ink pen. “ON.” Making Various Prints Making Various Prints Confidential DMP-1000P (AEP)

  • Page 10: Making An Index List Of Images

    (B) instead of floppy disk. pressing PICTURE. If you press CLEAR ALL, the printer is reset to stand by mode. Perform printing procedures from the beginning. Making Various Prints Making Various Prints Confidential DMP-1000P (AEP)

  • Page 11: For Your Information

    For Your Information For Your Information Confidential DMP-1000P (AEP)

  • Page 12: Chart For Various Print Mode

    If you use them in different combination, proper printing results may not be obtained, or paper jam or other trouble may occur. For Your Information For Your Information Confidential 1-10 E 1-10 DMP-1000P (AEP)

  • Page 13: Disassembly

    3 flat cable (DKSW39) (CN504) 1 two screws (BVTP3 × 20) 1 two screws (BVTP3 × 20) DC FAN (HEAD FAN) (M901) 2 two screws (BTP2.6 × 12) 4 cushion, fan 1 connector (CN1938) 3 DC fan (head fan) (M901) Confidential DMP-1000P (AEP)
  • Page 14 DK-39E BOARD SECTION 1 flat cable (DKFD39) (CN2100) 3 two screws (BV2.6 × 8) 1 FP-700 flexible board (CN501) 5 DK-39E board section 1 flat cable (ADFE13) (CN503) 1 flat cable (ADHE13) (CN502) 2 mini jack block 4 harness Confidential DMP-1000P (AEP)
  • Page 15 4 flat cable (POHE13) 6 two screws (BV2.6 × 8) (CN202) 3 connector (CN201) 1 two screws (BV2.6 × 8) 7 machanism deck section 5 core (FPC) 1 two screws (BV2.6 × 8) 2 escutcheon (60) block Assy Confidential DMP-1000P (AEP)
  • Page 16 1 FP-703 flexible board (CN1934) 2 two connectors (CN1940, 1941) 4 Removal the MD-39 board to direction of the arrow. 2 three connectors 3 screw (CN1931, 1932, 1935) (BVTT2.6 × 6) 1 FP-702 flexible board (CN1933) 2 connector (CN1942) Confidential DMP-1000P (AEP)
  • Page 17 (BVTT2.6 × 6) 1 two screws (BVTT2.6 × 6) CAUTION FOR INSTALLING Cabinet (upper) Assy Install the Indication dial to the switch (S100) on the FR-23 board as shown in the figure. Indication dial S100 FR-23 board Fig.1 Confidential DMP-1000P (AEP)
  • Page 18 Phase adjusting of Feeder cam Assy 1) Remove each part in numerical order in the figure. (Refer to Fig.2) 4 Feed lock 3 Tension spring 6 Feed lock 5 Tension spring 7 Feeder cam (R) Assy 1 Two screws 2 Feeder motor Assy Fig.2 2) Rotate the gear (A) 8 in the direction of arrow, and pierce the Pin (ø1) 9 through from a positioning hole on the reinforce-...

  • Page 19: Mechanical Adjustments

    Note: Do not remove the screw. 8 two screws 0 heat sink (PSW2.6 × 8) 1 flat cable (POHE13) 2 flat cable (ADHE13) qa head arm 9 thermal head Fig. 2 Fig. 1 Confidential 3-1 E DMP-1000P (AEP)

  • Page 20: Electrical Adjustments

    VIDEO IN S-VIDEO OUT (75 Ω) VIDEO OUT (75 Ω) • If pattern generator provide Y/C separate output terminals Pattern Generator Monitor TV Y OUT (75 Ω) Chroma OUT (75 Ω) VIDEO IN VIDEO S-VIDEO Fig. 4-1 Confidential DMP-1000P (AEP)
  • Page 21 Chroma signal 300 ± 10 mV Chroma amplitude Burstsignal to be flat Burst amplitude : chroma amplitude = 0.30 : 0.66 Fig. 4-2 Color bar signals of pattern generator (at terminating resistance 75 Ω ) Confidential DMP-1000P (AEP)
  • Page 22 (6) Compare the second printed pattern density with that of the simple, and if the density differs, repeat steps (3) to (6). Note: Only one print is required after the second time. (7) Turn off the power switch. Confidential DMP-1000P (AEP)
  • Page 23 Measuring equipment Oscilloscope Adjustment part RV103 Specification value 700 ± 10 mVp-p Adjustment Procedure: (1) Adjust RV103 so that the A level (white) of waveform on the oscilloscope satisfies the specification value. White (100%) Fig. 4-7 Fig. 4-5 Confidential DMP-1000P (AEP)
  • Page 24 (1) Connect on oscilloscope to the CL409 (from IC407 yf pin to the point via R478). (2) Adjust RV404 so that the A level (white) of waveform on Yellow the oscilloscope satisfies the specification value. White (100%) Fig. 4-11 Fig. 4-9 Confidential DMP-1000P (AEP)
  • Page 25 0 ° Yellow Fig. 4-12 Reference : B-Y Waveform (CL408) • If yellow phase is under 163 ° , extend the A level. • If yellow phase is over 171 ° , shorten the A level. Fig. 4-13 Confidential DMP-1000P (AEP)
  • Page 26 IC503 A/D Input R/Y Level IC407 Adjustment RV401 RV402 CT500 D/A Output Y Level D/A Output Chroma Level Free-run Frequency (2) Adjustment Adjustment Adjustment – DK-39E Board (side B) – IC506 IC505 CL408 IC401 CL407 CL409 CL427 Confidential DMP-1000P (AEP)
  • Page 27 – VI-39 Board (side B) – RV102 Y/C Separation Chroma Level Adjustment RV103 Y/C Separation Y Level Adjustment CL138 CL129 – MD-39 Board (component side) – – VS-39 Board (component side) – J1802 OUTPUT CN1943 Confidential 4-8 E DMP-1000P (AEP)

  • Page 28: Diagrams

    CLAMP 36 U OUT Q102 (2/2) MODULATOR : Y SIGNAL XO IN PULSE PHASE : CHROMA SIGNAL CT103 GENERATOR SHIFTER ENCODER XO OUT : R-Y SIGNAL 4.43MHz X102 4.43MHz : B-Y SIGNAL C SYNC IN SYCX CGEEX Confidential DMP-1000P (AEP)

  • Page 29: Block Diagram - Main Section

    21 – 23, 25 – 29 41 – 44, 46 – 49 12, 4, 5, 11, 10, 6 A1 – A14 WR, RD ADDRESS BUS ADDRESS BUS (Page 5-5) DATA BUS DATA BUS WR, RD (Page 5-7) Confidential DMP-1000P (AEP)

  • Page 30: Block Diagram -Floppy Disk Drive Control/Eeprom Section

    FDD DMA RQ FOR CHECK D0 – D7 MD1/BOOT 46 47 57 – 60, 62, 63, 65, 67 RESET WR, RD (Page 5-3) D0 – D7 (Page 5-4) DATA BUS RESET (Page 5-3) (Page 5-4) ADDRESS BUS Confidential DMP-1000P (AEP)

  • Page 31: Block Diagram - Head/Sensor/Motor/Power Supply Section

    FE MOTOR 1 D1735 FMTRCCW FE POSITION RIBBON CODE SENSOR LED COMPARATOR LED DRIVE 74 RIBBON-LED SENSE (PH904 – 906) B+ IC100 Q1903 FE DESORPTION RIBBON ERROR SENSE FEEDER INDICATOR FEEDER POSITION SENSOR S1871 (RIBBON DOOR DETECT) X502 20MHz Confidential DMP-1000P (AEP)

  • Page 32: Frame Schematic Diagram

    (FFC) GND (FAN) GND (FAN) CN1932 CN1871 RD-39 (FFC) VS-39 PS-33 +5V (DIGITAL) +5V (DIGITAL) RIBBON DOOR SENS RIBBON DOOR SENS RD-33 CN1938 HEAD FAN +5V(HEAD FAN) +5V (DIGITAL) M901 FAN (HEAD FAN) – FAN (HEAD) Confidential 5-10 DMP-1000P (AEP)

  • Page 33: Notes For Printed Wiring Board And Schematic Diagram

    (SWITCHING POWER) JD-39 board i : COMPOSITE VIDEO h : Y SIGNAL : CHROMA SIGNAL : R-Y SIGNAL DK-39E board : B-Y SIGNAL FE-39 board – Automatic Feeder Section – FR-35 board FJ-23 board FR-23 board Confidential 5-11 5-12 DMP-1000P (AEP)

  • Page 34: Printed Wiring Board - Vs-39 Board

    See page 5-11 for Circuit Boards Location. VS-39 BOARD VS-39 BOARD (SIDE B) (SIDE A) J1802 OUTPUT VI-39 BOARD CN101 (Page 5-16) J1801 VIDEO INPUT CJ1801 S-VIDEO 1-672-599- 1-672-599- (13) (13) 5-8. SCHEMATIC DIAGRAM – VS-39 Board – (Page 5-17) Confidential 5-13 DMP-1000P (AEP)

  • Page 35: Printed Wiring Board - Fe-39 Board

    FE-39 BOARD (SIDE A) (13) 1-672-604- AUTOMATIC FEEDER (Page 5-46) FJ-23 BOARD CN201 DK-39E BOARD CN503 FE-39 BOARD (Page 5-24) (SIDE B) (13) 1-672-604- D1881,1882 5-10. SCHEMATIC DIAGRAM – FE-39 Board – (Page 5-47) (Page 5-34) Confidential 5-14 DMP-1000P (AEP)

  • Page 36: Schematic Diagram - Vi-39 Board

    • Semiconductor VI-39 BOARD (SIDE B) Location (Side B) Ref. No. Location D100 Q102,104,107, 109,123,124 Q101 Q102 Q104 A-12 Q107 Q109 Q113 Q123 A-12 Q124 A-12 Q250 CL105 CL106 CL129 (13) 1-672-598- Confidential 5-15 5-16 5-17 5-18 5-19 DMP-1000P (AEP)

  • Page 37: Printed Wiring Board – Dk-39E Board –

    Q404 (Page 5-15) Q401,405-410,416 Q402-404,411-413 Q405 1C 2B 2E 1 Vp-p 0.5 Vp-p 7.2 Vp-p Q406 Q407 1E 1B 2C Q408 Q409 Q410 Q411 Q412 50 ns Q413 Q416 Confidential Confidential 5-20 5-21 5-22 5-23 5-24 DMP-1000P (AEP) DMP-1000P (AEP)

  • Page 38: Schematic Diagram - Dk-39E Board (2/3)

    5-14. SCHEMATIC DIAGRAM – DK-39E Board (1/3) – • See page 5-21 for Waveforms. • See page 5-51 for IC Block Diagram. (Page 5-34) (Page 5-30) (Page 5-35) (Page 5-34) (Page 5-19) Confidential 5-25 5-26 5-27 5-28 5-29 DMP-1000P (AEP)

  • Page 39: Schematic Diagram - Dk-39E Board (3/3)

    5-15. SCHEMATIC DIAGRAM – DK-39E Board (2/3) – • See page 5-21 for Waveforms. • See page 5-51 for IC Block Diagram. (Page 5-14) (Page 5-25) (Page 5-35) (Page 5-36) (Page 5-43) (Page 5-27) (Page 5-27) (Page 5-36) (Page 5-40) Confidential 5-30 5-31 5-32 5-33 5-34 DMP-1000P (AEP)
  • Page 40 5-16. SCHEMATIC DIAGRAM – DK-39E Board (3/3) – • See page 5-21 for Waveform. (Page 5-30) (Page 5-25) (Page 5-34) (Page 5-30) Confidential 5-35 5-36 DMP-1000P (AEP)

  • Page 41: Printed Wiring Board – Sw-39 Board –

    D1737-1739 (PRINTING STATUS INDICATOR) POWER 1-672-606- (12) S1706-1708,1710-1715,1717,1718 • Semiconductor Location Ref. No. Location D1731 D1733 D-10 D1734 D-11 D1735 E-19 D1736 E-18 D1737 E-15 D1738 E-16 D1739 E-16 D1750 B-15 IC1700 B-16 Q1731 E-17 Confidential 5-37 5-38 DMP-1000P (AEP)

  • Page 42: Schematic Diagram - Sw-39 Board

    5-18. SCHEMATIC DIAGRAM – SW-39 Board – • See page 5-52 for IC Block Diagram. (Page 5-30) Confidential 5-39 5-40 DMP-1000P (AEP)

  • Page 43: Printed Wiring Boards - Md-39/Jd-39/Rd-39/Hp-39 Boards

    PH902 PH903 SENSOR RIBBON MARK0 RIBBON MARK1 1-661-554- SENSOR SENSOR • Semiconductor • Semiconductor Location (Side A) Location (Side B) Ref. No. Location Ref. No. Location D1901 D1903 Q1900 IC1900 Q1903 IC1901 IC1902 IC1903 Q1902 Confidential 5-41 5-42 DMP-1000P (AEP)

  • Page 44: Schematic Diagram - Md-39/Jd-39/Rd-39/Hp-39 Boards

    5-20. SCHEMATIC DIAGRAM – MD-39/JD-39/RD-39/HP-39 Boards – • See page 5-52 for IC Block Diagrams. (Page 5-34) The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Confidential 5-43 5-44 5-45 DMP-1000P (AEP)

  • Page 45: Printed Wiring Boards - Automatic Feeder Section

    FR-23 BOARD (SIDE B) • Semiconductor Location Ref. No. Location • IC Block Diagrams D100 D101 IC101 SN74HC148ANSR IC102 LB1638 D102 N.C. IC100 IC101 IC102 (11) 1-659-937- OUTPUT INPUT OUT1 INPUT OUT2 OUTPUT N.C. OUTPUT Confidential 5-46 5-47 5-48 DMP-1000P (AEP)
  • Page 46 8 IC108 0 (VCXO) 0.8 Vp-p 0.8 Vp-p 17.73 MHz 4 IC108 wg (VIDEO) 9 IC108 5 (C IN) 0.2 Vp-p 0.2 Vp-p 5 IC108 w; (R-Y) 0 IC103 w; (V OUT) 0.8 Vp-p 1 Vp-p Confidential 5-49 DMP-1000P (AEP)
  • Page 47 29 YV TEST 28 ADVD TEST 27 RT 26 AAVD TEST 25 ADIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Confidential 5-50 DMP-1000P (AEP)
  • Page 48 COMP COMP DECODER SEPARATOR DETECTOR DECODER ID PULSE COMP NTSC 90° BURST 4FSC TINTO GATE DETECTOR VCXO BURST GATE REFERENCE PULSE AMPLIFIER AMPLIFIER DETECTOR VOLTAGE 10 11 12 13 – DK-39E Board – IC406, 514 TC7W74FU Confidential 5-51 DMP-1000P (AEP)
  • Page 49 SWITCH VOLTAGE SHIFT REGISTER DETECT 2 IN– 4 IN+ 13 NC 2 IN+ 4 IN– SWITCH DATA 1 IN– 3 IN+ CLOCK AND CALENDER 1 IN+ 3 IN– SWITCH OUT PUT FOUT DEVIDER CONTROLLER FSEL 32.768kHz Confidential 5-52 DMP-1000P (AEP)

  • Page 50: Ic Pin Function Description

    EE, WR/READ select signal output to the video input circuit (IC101, 102) and Y/C separator CGEEX (IC105) System reset signal input from the reset signal generator (IC501) “L”: reset RESX For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H” Confidential 5-53 DMP-1000P (AEP)
  • Page 51 Horizontal drive data input from the CXD1229Q (IC401) Serial clock signal input from the CXD1229Q (IC401) EEVN E/O input from the CXD1229Q (IC401) MNT4 Test monitor output terminal (normally: open) MNT3 Test monitor output terminal (normally: open) Confidential 5-54 DMP-1000P (AEP)
  • Page 52 Two-way data bus with the D-RAM (IC403) (lower 8 bit) DGND — Ground terminal (logic system) DVCC — Power supply terminal (+5V) (logic system) 170 to176 MDT8 to MTD14 Two-way data bus with the D-RAM (IC403) (upper 8 bit) Confidential 5-55 DMP-1000P (AEP)
  • Page 53 “L”: FD, “H”: VIDEO MOTION or VIDEO STILL 3.3V 3.3V/5V selection signal output terminal Not used (open) FDC CS Chip select signal output to the floppy disk drive controller (IC2101) CP signal output terminal Not used (open) Confidential 5-56 DMP-1000P (AEP)
  • Page 54 Setting terminal for the CPU operational mode (fixed at “H” in this set) Setting terminal for the CPU operational mode (fixed at “L” in this set) PLL VCC — Power supply terminal (+5V) (PLL system) PLL CAP Connected to capacitor for the PLL Confidential 5-57 DMP-1000P (AEP)
  • Page 55 — Ground terminal STP4 Stepping pulse (4) output for the platen motor (M904) RAS-CNT Selection signal output of the row address strobe signal FDD READY IN Ready signal input from the floppy disk drive controller (IC2101) Confidential 5-58 DMP-1000P (AEP)
  • Page 56 Address signal input from the system controller (IC503) — Power supply terminal (+5V) — Ground terminal Two-way data bus with the A/D, D/A converter (IC407), system controller (IC503) and 54 to 61 DT15 to DT8 D-RAM (IC509) (upper 8 bit) Confidential 5-59 DMP-1000P (AEP)
  • Page 57 Ribbon code (1) detect sensor (PH905) input terminal RCODE0 Ribbon code (0) detect sensor (PH906) input terminal FKEY2 Sheets bit (2) input from the auto feeder unit FKEY1 Sheets bit (1) input from the auto feeder unit Confidential 5-60 DMP-1000P (AEP)
  • Page 58 GND3 — Ground terminal (buffer system) Signal showing that the head of drive positions at the inside from No. 43 cylinder is output Not used (open) 42, 43 VDD1 — Power supply terminal (+5V) (digital system) Confidential 5-61 DMP-1000P (AEP)
  • Page 59 Clock output terminal Not used (open) — Not used (open) 89, 90 GND1 — Ground terminal (digital system) DEN0 Value corresponding to the set data transfer rate is output Not used (open) GND3 — Ground terminal (buffer system) Confidential 5-62 DMP-1000P (AEP)
  • Page 60 Drive select signal is output Not used (open) GND3 — Ground terminal (buffer system) Drive select signal is output Not used (open) Spindle motor on/off control signal output of the drive unit Not used (open) Confidential 5-63 E 5-63 DMP-1000P (AEP)

  • Page 61: Exploded Views

    1-759-644-21 DRIVE, FLOPPY DISK (3.5inch) 3-971-519-01 RAIL (L), FEEDER 1-790-360-11 FFC (DKFD39) 3-971-530-01 RAIL (R), FEEDER X-4622-665-1 CABINET ASSY, UPPER X-4622-018-3 BRACKET ASSY, FD 4-639-920-21 DIAL 4-640-196-01 BUTTON, FD EJECT 4-639-919-01 HOLDER, DIAL * 16 1-500-169-11 CORE (FPC) 4-643-569-01 GASKET Confidential DMP-1000P (AEP)
  • Page 62 A-8056-746-A DK-39E COMPLETE PWB A-8054-971-A VI-39 COMPL * 52 4-639-317-01 INSULATED PLATE, VI * 56 4-639-184-01 SHIELD, VI 1-783-919-11 CABLE, FLAT (VIDK20) * 57 4-638-736-01 SPRING, JACK GROUND 3-946-346-01 SCREW (+BV) (2.6X8), TAPPING * 58 4-639-930-02 BRACKET, JK Confidential DMP-1000P (AEP)
  • Page 63 A-7092-966-A MOTOR BLOCK ASSY, REEL 3-971-460-01 SPRING (PM), TENSION M901 1-763-018-21 FAN, DC (HEAD FAN) 1-661-552-11 PC BOARD, FP-700 FLEXIBLE M903 1-698-377-12 MOTOR (RIBBON) 1-543-936-11 CORE (FPC) M904 1-698-790-11 MOTOR, DC (STEPPING MOTOR) (PLATEN) A-8054-958-A MD-39 MOUNT Confidential DMP-1000P (AEP)
  • Page 64 X-3946-408-3 BRACKET ASSY, HM 3-971-492-01 ARM (SP), C LOCK 4-926-219-02 RING (DIA. 2.3), RETAINING 1-956-196-21 HARNESS (HM-33) 3-971-474-01 GEAR (A), HEAD DRIVE 1-956-198-21 HARNESS (RD-33) 3-971-513-41 COVER, REAR * M902 A-7092-967-A MOTOR BLOCK ASSY, HEAD (HEAD UP/DOWN) 3-971-471-01 BEARING, ROLLER Confidential DMP-1000P (AEP)
  • Page 65 X-3946-406-1 GEAR (R) ASSY, POWER 4-926-219-02 RING (DIA. 2.3), RETAINING * 232 X-3946-407-1 GEAR (L) ASSY, POWER * 216 X-3946-412-2 ARM (L) ASSY, RELEASE 1-956-197-21 HARNESS (JD-33) 3-669-607-11 +PSW (SMALL ROUND) (2.6) 1-956-651-21 HARNESS (HMD-3) HEAD9011-500-568-21 HEAD, THERMAL Confidential DMP-1000P (AEP)
  • Page 66 4-641-239-01 PLATE, PF GROUND 0260 1-468-364-31 REGULATOR, SWITCHING 1-500-227-41 BEAD, FERRITE 1-956-199-21 HARNESS (PS-33) 1-761-308-11 JACK ASSY BLOCK, MINIATURE * 262 A-7093-373-E LEVER BLOCK ASSY, SEPARATION 1-956-625-21 HARNESS (HH-C00-010-BB) 1-468-249-51 SWITCH BLOCK, POWER M905 1-763-018-21 FAN, DC (POWER FAN) *0263 Confidential DMP-1000P (AEP)
  • Page 67 * 318 3-971-621-01 HOOK, SEPARETION 3-971-601-01 SPRING, COMPRESSION A-8045-344-A PREPARE BLOCK ASSY, PAPER 3-971-585-21 BUTTON, FEEDER LID 1-958-356-41 HARNESS 3-971-584-01 RETAINER, BUTTON 1-956-200-31 HARNESS (FM-33) X-4622-520-1 CABINET (UPPER) ASSY, F M101 1-698-377-12 MOTOR (FEEDER) 3-971-581-01 SPRING (L), FEEDER Confidential DMP-1000P (AEP)
  • Page 68 3-971-570-01 PLATE, LOCK ARM FIXED 1-500-385-11 CORE, FPC 1-777-226-11 CABLE, FLAT (FFC) (FRJ-3) 12P 3-971-580-01 GUIDE, PAPER PUSH * 358 A-7072-804-A FR-23 MOUNTED PWB 3-971-579-01 SPRING, PUSH GUIDE 3-945-884-11 SCREW (2X6) 3-973-900-01 CUSHION, F * 360 3-971-569-03 PLATE, UP Confidential DMP-1000P (AEP)
  • Page 69 3-971-622-01 SPRING, TENSION 3-971-599-01 SLEEVE, R 3-971-573-04 PLATE (L), SIDE 3-971-554-02 ROLLER, R 3-971-557-03 GEAR (A) 3-972-608-01 RETAINER, PAPER 3-971-567-01 GEAR (X) 3-701-438-11 WASHER, 2.5 3-971-558-01 GEAR (B) 3-971-568-01 FRAME, ROLLER 1-661-555-11 PC BOARD, FP-701 FLEXIBLE Confidential 6-9 E DMP-1000P (AEP)

  • Page 70: Electrical Parts List

    C434 1-164-505-11 CERAMIC CHIP 2.2uF C435 1-164-156-11 CERAMIC CHIP 0.1uF C513 1-164-156-11 CERAMIC CHIP 0.1uF C436 1-124-778-21 ELECT CHIP 22uF 6.3V C514 1-124-778-21 ELECT CHIP 22uF 6.3V C437 1-126-206-11 ELECT CHIP 100uF 6.3V C515 1-115-156-11 CERAMIC CHIP Confidential DMP-1000P (AEP)
  • Page 71 * CN402 1-580-055-21 PIN, CONNECTOR (SMD) 2P FB533 1-500-238-22 FERRITE CN501 1-778-544-11 CONNECTOR, FFC/FPC (ZIF) 30P FB534 1-500-238-22 FERRITE CN502 1-778-622-21 CONNECTOR, FFC/FPC 10P FB535 1-500-238-22 FERRITE CN503 1-785-468-11 CONNECTOR, FFC/FPC 13P FB536 1-500-238-22 FERRITE FB537 1-500-238-22 FERRITE Confidential DMP-1000P (AEP)
  • Page 72 1-218-855-11 METAL CHIP 2.2K 0.5% 1/16W IC407 8-759-421-81 IC F432301PGF IC501 8-759-542-91 IC S-80840ANUP-ED4-T2 R305 1-218-855-11 METAL CHIP 2.2K 0.5% 1/16W IC502 8-759-234-20 IC TC7S08F (TE85R) R311 1-216-809-11 RES-CHIP 1/16W IC503 8-759-670-23 IC HD64F7045F28S631 R315 1-216-821-11 RES-CHIP 1/16W Confidential DMP-1000P (AEP)
  • Page 73 1-218-844-11 METAL CHIP 0.5% 1/16W R527 1-216-809-11 RES-CHIP 1/16W R457 1-218-855-11 METAL CHIP 2.2K 0.5% 1/16W R458 1-218-855-11 METAL CHIP 2.2K 0.5% 1/16W R528 1-216-809-11 RES-CHIP 1/16W R459 1-216-809-11 RES-CHIP 1/16W R529 1-216-809-11 RES-CHIP 1/16W R532 1-216-809-11 RES-CHIP 1/16W Confidential DMP-1000P (AEP)
  • Page 74 1/16W R2005 1-216-809-11 RES-CHIP 1/16W RV401 1-238-853-11 RES, ADJ, CERMET 1K R2006 1-216-809-11 RES-CHIP 1/16W RV402 1-238-853-11 RES, ADJ, CERMET 1K R2007 1-216-833-91 RES-CHIP 1/16W RV404 1-238-855-11 RES, ADJ, CERMET 4.7K RV405 1-238-854-11 RES, ADJ, CERMET 2.2K Confidential DMP-1000P (AEP)
  • Page 75 * CN101 1-695-320-21 PIN, CONNECTOR (1.5mm) (SMD) 2P A-8054-958-A MD-39 MOUNT CN102 1-565-771-11 CONNECTOR, FPC (1mm) (ZIF)12P ************ D100 8-719-420-83 DIODE MA3075WA- (TX) C1900 1-165-319-11 CERAMIC CHIP 0.1uF D101 8-719-017-19 DIODE 02DZ10-TPH3 C1901 1-165-319-11 CERAMIC CHIP 0.1uF Confidential DMP-1000P (AEP)
  • Page 76 JR1711 1-216-296-91 SHORT R1927 1-216-841-11 RES-CHIP 1/16W R1937 1-216-827-11 RES-CHIP 3.3K 1/16W L1700 1-412-058-11 INDUCTOR CHIP 10uH The components identified by mark 0 or dotted Confidential line with mark 0 are critical for safety. Replace only with part number specified. DMP-1000P (AEP)
  • Page 77 C163 1-109-982-11 CERAMIC CHIP S1719 1-771-497-21 SWITCH, SLIDE (INPUT SELECT) C164 1-164-156-11 CERAMIC CHIP 0.1uF S1720 1-771-246-21 SWITCH, SLIDE (DATE) C167 1-164-156-11 CERAMIC CHIP 0.1uF C168 1-165-176-11 CERAMIC CHIP 0.047uF ************************************************************** C169 1-126-205-11 ELECT CHIP 47uF 6.3V Confidential DMP-1000P (AEP)
  • Page 78 1-459-949-11 COIL R140 1-216-802-11 RES-CHIP 1/16W R141 1-216-819-11 RES-CHIP 1/16W IC101 8-759-446-66 IC MM1113XFBE R145 1-216-839-11 RES-CHIP 1/16W IC102 8-759-446-66 IC MM1113XFBE R146 1-216-832-11 RES-CHIP 8.2K 1/16W IC103 8-752-089-35 IC CXA1229AM-T6 R147 1-218-851-11 METAL CHIP 1.5K 0.5% 1/16W Confidential DMP-1000P (AEP)
  • Page 79 Replace only with part number specified. R255 1-216-821-11 RES-CHIP 1/16W This manual and the constituent data may not be replicated, copied nor reprinted in whole or in part without prior written authorization of Sony Corporation. English Sony Corporation 2000B0538-1 Confidential Printed in Japan e -Print Company ©...

This manual is also suitable for:

Fvp-1e

Table of Contents