JVC DIAMOND DM65USR User Manual page 7

CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool
surroundings into a warm room or if the temperature of the room rises suddenly. When
this happens, unit's performance will be impaired. To prevent this, let the unit stand in
its new surroundings for about an hour before switching it on, or make sure that the
room temperature rises gradually. Condensation may also form during the summer
if the unit is exposed to the breeze from an air conditioner. In such cases, change the
location of the unit.
HOW TO HANDLE THE LED PANEL
• Do not press hard or jolt the LED panel. It may cause the LED panel glass to break
and injury may occur.
• If the LED panel is broken, make absolutely sure that you do not touch the liquid in
the panel. This may cause skin in ammation.
• If the liquid gets in your mouth, immediately gargle and consult with your doctor.
Also if the liquid gets in your eyes or touches your skin, consult with your doctor
after rinsing for at least 15 minutes or longer with clean water.
Important Safety Instructions
Possible Adverse Effects on LED Panel:
If a xed (non-moving) pattern remains on the LED Panel for long periods of time,
the image can become permanently ingrained in the LED Panel and cause subtle but
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY.
Never leave your TV on for long periods of time while it is displaying the following
formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and
website.
• Special Formats that do not use the entire screen. For example, viewing letterbox
style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen);
or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left
and right sides of screen).
The following symptoms are not signs of malfunction but
technical limitation.
• LED Panels are manufactured using an extremely high level of precision technology,
however sometimes parts of the screen may be missing picture elements or have
luminous spots. This is not a sign of a malfunction.
• Do not install the TV near electronic equipment that produces electromagnetic
waves. Some equipment placed too near this unit may cause interference.
• E ect on infrared devices – There may be interference while using infrared devices
such as infrared cordless headphones.