The base
Enabling the pairing mode
You enable the pairing mode when you associate an additional handset, for example.
Give a long press on the
Your base will remain in pairing mode for about 1 minute.
Changing the default code
1
Enter the current code and validate with
2
Enter the new code and validate with
3
Re-enter the new code to confirm and validate with
Resetting the base
When you reset your base, all the settings are returned to their initial values (factory settings),
except for the phonebook.
Follow the instructions on the screen and confirm.
key on the base.
.
.
(long press)
>
Settings
>
Base settings
.
>
Settings
>
Base settings
>
System PIN
>
Base reset
35
Need help?
Do you have a question about the 9000B and is the answer not in the manual?