Appliance Description; Before The First Use; Assembling The Biscuit Shaper - Bifinett KH 1191 Operating Instructions Manual

Electric pastry press, electrical biscuit shaper
Hide thumbs Also See for KH 1191:
Table of Contents

Advertisement

CO Time
The CO Time (Continuous Operation Time) details
how long an appliance can be operated without
the motor overheat-ing and becoming damaged.
After the appliance has run for this period it must be
switched off until the motor has cooled itself down.

Appliance description

q
Direction switch
w
Start switch
e
Power cable with power plug
r
Motor unit
t
Threaded rod
y
Pusher
u
Container
i
Nozzle adapter with seal
o
Nozzles
a
Adapter lock
s
Lock ring
d
Motif discs

Before the first use

Take the Biscuit Shaper and all accessories from the
packaging and remove all packaging material.
Clean all of the components as described in the section
„Cleaning and care".

Assembling the Biscuit Shaper

Note:
Remove the power plug
fore assembling accessories.
e
from the wall socket be-
Inserting the threaded rod with pusher
1. Place the end of the threaded rod
r
motor unit
. Ensure that the pins inside the
motor unit
r
engage with the guide rails on the
threaded rod
t
2. Slide the threaded rod
far as it will go into the motor unit
Assembling the container
Note:
u
The container
must be fitted, otherwise the
Biscuit Shaper will not function!
1. Slide the container
that the guide rails inside the container
ge in the in notches on the pusher
2. Place the container
that the arrow on the container
open lock
on the motor unit
3. Turn the container
container points to the closed lock
r
motor unit
.
4. Insert the power plug
5. Place the direction switch
pointing downwards
6. Press and hold the start button
pusher
y
has returned itself to the MAX
marking.
7. Remove the power plug
Assembling motif discs
When the pusher
y
assembled:
1. Select the desire motif disc
2. Place the motif disc
3. Place the lock ring
the container
u
.
4. Turn the lock ring
until it engages
- 3 -
t
in the
.
t
with the pusher
r
.
u
over the pusher
y
y
.
u
on the motor unit
u
points to the
r
.
u
until the arrow on the
on the
e
into a wall socket.
q
onto the arrow
.
w
until the
e
from the wall socket.
and container
u
are
d
.
d
into the lock ring
s
d
with the motif disc
s
in the direction of the arrow
.
y
as
such
u
enga-
r
so
s
.
onto

Advertisement

Table of Contents
loading

Table of Contents