Page 1
GoWISE USA® Blood Pressure Monitor Upper Arm Type Instruction Manual GW22051 Thank you for purchasing this GoWISE USA Blood Pressure Monitor. To assure correct use of this monitor, read these instructions carefully and GoWISE USA® thoroughly. www.gowiseusa.com Please keep the manual for future info@gowiseusa.com...
Thank you for selecting this GoWISE USA Blood Pressure Monitor. Itf eatures blood pressure measurement, pulse rate measurement, auto-save results, and a long life of reliable service. This manual contains important safety and care information as well as step-by-step instructions for using the product. Read the manual carefully and thoroughly before using the product.
The operator shall not touch output of AC adaptor and the p simultaneously. To avoid measurement errors, avoid the c n of strong c field radiated interference signal or electrical fast transient/burst signal when using the AC adaptor. Inspect the monitor and accessories for proper working on before each use.
Monitor components CUFF AIR HOSE AIR CONNECTOR PLUG MEM/UP BUTTON SET/DOWN BUTTON START/OFF BUTTON LCD DISPLAY BATTERY COMPARTMENT Component list of pressure measuring system 1 Cuff 2 Micro Control Unit 3 Amplifier List 1.Blood Pressure Monitor 2.Cuff (Type B applied part) 4.User manual BEFORE YOU START Choice of power supply...
2. Install the s by matching the correct polarity, as shown. 3. Replace the cover. Replace b s when any of the following occur: • The shows on display • The display dims • The display does not light up CAUTION •...
Page 7
Repeat step 2 and 3 to Repeat step 2 and 3 to set the [MONTH] and [DAY]. set the [HOUR] and [SECOND]. Start Start Stop Stop Repeat step 2 and 3 to set the [UNIT]. mmHg Start Start Stop Stop r the unit is set, the “done”...
MEASUREMENT Tie the cuff 1. Tie the cuff on your upper arm, then the air hose off-center toward the inner side of arm in line with the e finger. 2. The cuff should be snug but not too ht. You should be able to insert one finger between the cuff...
2. Press the “START/STOP” to power off, otherwise it will turn Start off y within 1 minutes. Stop OPERATION OF RECORDS Recalling records 3. Press the “MEM” to show the most recent record. 4. Press the “MEM” or “SET” to ge he record you want. DOWN The current is the No 18.
2. Press “SET” to confirm the , and the monitor will turn off 3. If you don’t want to delete the records, Start press “START/STOP” to escape. Stop 4. If there is no record, the right display will show hyphens. INFORMATION FOR USER Tips for measurement The following circumstances can cause invalid results:...
In a very cold environment When you need to discharge urine In an c field When you have an arrhythmia Maintenance In order to ge he best performance from your monitor, follow these Avoid touching water, Put in a dry place and avoid the sunshine clean it with a dry cloth in case.
Store the monitor and accessories carefully to avoid damage. The AC adaptor cord, air hose, and arm cuff should not be kinked or folded . While in storage, the AC adaptor should be placed underneath the main unit so it does not damage the display. ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? Systolic...
Why does my blood pressure fluctuate throughout the day? • Individual blood pressure varies every day. It can also be affected by the way you e the cuff and your p n during the measurement. For the best results, measure your blood pressure under the same s every •...
PROBLEM SYMPTOM CHECK THIS REMEDY Display is dim or No power will not light up. incorrectly. Show on the display The cuff is not Refasten the cuff and then E 1 shows secure. measure again. Refasten the cuff and then E 2 shows measure again.
Ming’s Mark Inc. dba GoWISE USA® shall not be liable for loss of use or any other incidental, l or indirect costs, expenses or damages. There are no express es except as listed above.
Need help?
Do you have a question about the GW22051 and is the answer not in the manual?
Questions and answers