Page 1
WISE USA Blood Pressure Monitor Upper Arm Type Instruction Manual GW22052 Thank you for purchasing this WISE USA GoWISE USA Blood Pressure www.gowiseusa.com Monitor. info@gowiseusa.com To assure correct use of this 1-855-233-9199 monitor, read these instructions carefully and thoroughly. Please keep the manual for...
Thank you for selecting this GoWISE USA Blood Pressure Monitor. It features blood pressure measurement, pulse rate measurement, auto‐save results, and a long life of reliable service. Measurements taken by GW22052 are equivalent to those obtained by a trained observer using the cuff and stethoscope auscultation method.
INTRODUCTION LCD display signal Severe Moderate Mild Normal SYMBOL DESCRIPTION EXPLANATION Systolic blood pressure High pressure result Diastolic blood pressure Low pressure result Pulse Pulse/minute Time (hour:minute) If “M” shows, the displayed measurement values Memory mmHg Measurement Unit of the blood pressure Irregular heartbeat Arrhythmia Grade...
Monitor components CUFF AIR HOSE AIR CONNECTOR PLUG SET/UP BUTTON START/OFF BUTTON BATTERY COMPARTMENT MEM/DOWN BUTTON BEFORE YOU START Choice of power supply • Battery powered mode: 6VDC 4 x AA batteries • AC adaptor powered mode: 100-240V, 50-60Hz, 1000mA...
CAUTION For the best effect and to protect your monitor, use the correct s and the special AC adaptor included with the monitor. Unplug the AC adaptor from power source when not in use. The installment and replacement of 1. Slide off the y cover.
g date, me and measurement unit It is important to set the clock before using your blood pressure monitor, so that a me stamp can be assigned to each record that is stored in the memory. (year: 2000 -2050, me: 24H) When the unit is off, press and hold “SET”...
Repeat step 2 and 3 to set the [HOUR] and [SECOND]. START START STOP STOP START START STOP STOP After the UNIT is set, “done” will appear on the display and then it will turn off automatically. MEASUREMENT Tie the cuff 1.
• Rest for 5 minutes before measuring blood pressure. • Wait at least 3 minutes between measurements. This allows your blood n to recover. • For a meaningful comparison, try to measure under similar c . For example, take daily measurements at approximately the same e and same n of upper arm,...
OPERATION OF RECORDS Recalling records 1. Press the “MEM” to show the most recent record. 2. Press the “MEM” or “SET” to get the record you want. DOWN Current record number. The corresponding The corresponding date is Octorber 11th. (The number of the record, date and e will be shown accordingly.) CAUTION The most recent record (1) is shown first.
g a record from memory If you did not get the measurement, you can delete all results by following these steps: 1. Press and hold “MEM” for 3 seconds; the display will flash “dEL ALL”. 2. Press “SET” to confirm the and the monitor will turn off...
INFORMATION FOR USER Tips for measurement For accurate readings, consider these Wait at least 1 hour Do not measure immediately r dinner or drinking. r tea, coffee, smoking. Wait at least 20 minutes Do not measure when er taking a bath. talking or moving fingers.
Maintenance In order to get the best performance from your monitor, follow these Do not immerse in water Keep in a dry place and avoid sunshine Avoid dusty environment Do not shake intensely or drop and unstable temperature. Remove dirt with dry or damp cloth Avoid washing the cuff Store the monitor and accessories carefully to avoid damage.
What is the standard blood pressure classification The following charts illustrate the blood pressure classification set forth by the World Health Organization (WHO) and the International Society of Hypertension (ISH) in 1999. Level Blood Pressure(mmHg) 121~130 131~140 141~160 161~180 <120 ≥180 81~85 86~90...
Why does my blood pressure fluctuate throughout the day? • Individual blood pressure varies every day. It can also be affected by the way you the cuff a nd your on during the measurement. For the best results, measure your blood pressure under the same every •...
TROUBLESHOOTING This section has a list of error messages that provide answers to questions you may have about your blood pressure monitor. If the monitor is not working as you think it should, please check here before calling for service. PROBLEM SYMPTOM CHECK THIS...
SPECIFICATIONS Battery powered mode: 6VDC, 4 x AA batteries AC Adaptor mode: POWER SUPPLY 100‐240V, 50‐60Hz, 1000mA (Use only the AC Adaptor provided with this product.) Digital LDC V.A. – 3.2” x 2.4” (80mm x 60mm) Display model Oscillographic testing mode Measurement mode Pressure: 0‐40kpa (0‐300mmHg) Measurement range...
Ming’s Mark Inc. dba GoWISE USA® shall not be liable for loss of use or any other incidental, l or indirect costs, expenses or damages. There are no express es except as listed above.
Need help?
Do you have a question about the GW22052 and is the answer not in the manual?
Questions and answers