Remote Control - Samsung SyncMaster 650MP User Manual

See Connecting Cables for further information regarding cable connections.

Remote Control

The performance of the remote control may be affected by a TV or other electronic device
operating near the LCD Display , causing a malfunction due to interference with the frequen-
cy.
Downloaded From TV-Manual.com Manuals
Note
Note
Introduction
BNC OUT [R, G, B, H, V] (BNC Terminal
(Output))
BNC (Analog PC) Connection: connecting
the R, G, B, H, V ports.
The number of LCD Displays that can be
connected to the loopout depends on the ca-
bles, signal source, etc. With cables or signal
source where there is no degradation, up to
10 LCD Displays can be connected (May not
be supported depending on the connected
cable).
BNC/COMPONENT IN [R/Y, G/P
P , H, V] (BNC/Component Connection Ter-
R
minal (input))
- During BNC input, please check specifica-
tions for the input ports below.
• [R/Y] --> Red port input
• [G/P ] --> Green port input
B
• [B/P ] --> Blue port input
R
- During component input, please check
specifications for the input ports below.
• [R/Y] --> Green port input
• [G/P ] --> Blue port input
B
• [B/P ] --> Red port input
R
SBB Lcok
Connect the network box.
Note
• For details, please see the network box
user manual.
• Purchasing the network box is optional.
14
, B/
B