Shooting With Auto - Casio EX-ZS50 User Manual

. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.

. Shooting with Auto

If the subject is not in the center of the frame...
"Focus lock" (page 55) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
To track the movement of a moving subject
Half-press the shutter button to follow and focus automatically on a moving subject.
See "O Tracking" (page 57) for more information.
. Shooting with Premium Auto
• When shooting with Premium Auto, you can use the menu screen (page 52) to
change the settings of only the menu items below. No other menu items will appear
on the menu while you are shooting with Premium Auto.
– REC: Anti Shake, Grid, Review, Icon Help
– Quality: T Quality (Snapshot), EV Shift
– Set Up: All items
• In addition to shutter speed, aperture, and ISO sensitivity, the camera
automatically executes the following operation as required when shooting with
Premium Auto.
– Auto Focus is normally performed until you half-press the shutter button.
– The camera automatically determines the focus point on the screen and focuses
there.
– Make-up (page 40)
Under the initial default camera setup when you purchase it, selecting Premium
Auto as the auto recording mode (page 25) turns on the Make-up function.
– Anti Shake (page 60)
• Shooting with Premium Auto can cause vibration and noise to occur due to lens
operation. This does not indicate malfunction.
• In some cases, Premium Auto may not be able to interpret the shooting
environment correctly. If this happens, shoot with standard Auto.
28
Quick Start Basics