Kompernass AUTOMATIC BREAD MACHINE KH 1172 Operating Instructions Manual page 18

What do I do if smoke comes from the baking space
6
or the ventilation slots ?
What has happened if the ingredients are not correctly
mixed or the bread is not correctly baked through?
What has happened if the baking mould
during the kneading process?
7
Why does the display
appliance doesn't allow itself to be started?
4
springs up
show „H:HH" and the
• Remove the power plug immediately! Allow the appliance
0
to cool down, then remove the baking mould
Clean the exterior of the baking mould
the baking space
sed by food residues. Should there be no food residues in
the baking space
4
baking mould
on. Make contact with the Customer Service department.
• A false programme has been selected.
• The button Stop/Start
operation.
• During the baking process there was an extended
power failure.
• The appliance lid
the baking process.
• The kneading hook
Remove the ingredients and do not re-use them. Remove
4
the baking mould
5
shaft turns. Should this not be so, make contact with
our customer service department.
• The dough is too firm, that is why the kneading hook
q
blocks and the baking mould
upwards. Add some fluid to the dough. Immediately
reclose the appliance lid
• The lateral springs on the base in the housing interior
have lost some of their tension. Remove the power
plug from the socket. Remove the baking mould
Press the springs outwards. Replace the baking mould
4
and close the appliance lid
into the power socket within 10 minutes. The programme
will be continued automatically.
• The appliance is still too hot from the previous baking
process. Press the button Stop/Start
adjustments appear in the display
to cool down, with the lid
Afterwards, the appliance allows itself to be used as
normal.
- 16 -
4
0
, as the smoke was probably cau-
0
or on the exterior surfaces of the
, do not switch the appliance back
has been pressed during
2
was opened several times during
q
is blocked.
and check to ensure that the drive
4
is pressed
2
.
2
. Re-insert the plug
until the default
7
. Leave the appliance
2
open, for approx. 20 minutes.
4
.
as well as
4
.