Using The Remote Control - Sony FD Trinitron WEGA KV-32XBR400 Operating Instructions Manual

Other Information

Using the Remote Control

Button Descriptions
POWER
MUTING
VCR/DVD SAT/CABLE
TV
PICTURE
MODE
SLEEP DISPLAY ANT
GUIDE
1 2 3
4 5 6
7 8 9
JUMP ENTER
0
FUNCTION
TV/VIDEO VCR/DVD SAT/CABLE TV
FREEZE
VOL CH
FAVORITES
MENU
RESET AV 1 2 3 DVD RM -Y174
TV
40
The following table describes the buttons on the remote control that
are for more advanced functions.
Main Power button must be turned ON to activate the Remote Control.
Outside Panel
Button Description
MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
VCR/DVD Turns the DVD player, MDP player, or VTR (VCR) on
(POWER)
and off.
SAT/CABLE Turns the satellite receiver or cable box on and off.
(POWER)
TV (POWER) Turns the TV on and off.
PICTURE MODE Press repeatedly to step through the available video
picture modes: Vivid, Standard, Pro, Movie. Also available
in the Video menu. For details, see "Selecting Video
Options" on page 26.
SLEEP Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV to
remain on before shutting off automatically. Cancel by
pressing until SLEEP OFF appears. While Sleep feature is
set, press once to view remaining time
DISPLAY Press once to display the current time and channel label
(if set) and channel number. Press again to turn Display
off. See page 34 for details on setting the time.
ANT
Changes the VHF/UHF input to the AUX input.
GUIDE Displays the program guide of your satellite antenna.
0 – 9 and ENTER Press 0 – 9 to select a channel, the channel changes after
2 seconds. Press ENTER for immediate selection.
JUMP
Press to jump back and forth between two channels. The
TV alternates between the current channel and the last
channel that was selected.
TV/VIDEO Cycles through available video inputs: TV, VIDEO 1, VIDEO 2,
VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6.
VCR/DVD Activates the remote control for use with a DVD player,
(FUNCTION) MDP, or VTR (VCR).
SAT/CABLE Activates the remote control for use with a satellite
(FUNCTION) receiver or cable box.
TV (FUNCTION)
Activates the remote control for use with the TV.