Sony FD Trinitron WEGA KV-32XBR400 Operating Instructions Manual page 13

Cable and Antenna
Cable Box
Connections
If your cable provider does not feature local channels, you may find
this set up convenient.
CATV cable
(No connection to
TO CONVERTER)
Antenna cable
Select CABLE or antenna (ANT) mode by pressing
control.
In order to receive channels with an antenna, you need to turn your Cable to OFF and
perform the Auto Program function (see page 30).
Some pay cable TV systems use scrambled or encoded signals that
require a cable box to view all channels.
Cable Box
1
Connect the coaxial connector from your cable service to the
cable box's IN jack.
2
Using a coaxial cable, connect the cable box's OUT jack to the
TV's VHF/UHF jack.
Cable
IN
Cable box
If you will be controlling all channel selection through your cable box, you should
consider using the Channel Fix feature (see page 30).
AUX
Rear of TV
TO CONVERTER
VHF/UHF
VHF/UHF
Rear of TV
OUT
Installing the TV
on the remote
ANT
7