Table of Contents
Advertisement
29
Menu key PCB Separation
- Separate the menu key PCB from the upper like
the picture.
PBA & INTENNA Saperation
1
Intenna Screw Removal
- Remove the intenna screw from the PBA.
3
Intenna Removal
- Separate the intenna body from the PBA with
melting - lead state.
※ Be careful not to break or bend the intenna
contact.
SCREW 1POINT
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View/Disassembly&Assembly Instructions
30
LCD Module Separation
- Separate the LCD module from the upper like
the picture.
※ Be careful not to lift it up suddenly with
too much force!! That could cause LCD crack.
2
Intenna Contact Re-soldering
- Solder the intenna contact points.
Completely separated state.
5-9
Re-soldering 2 point
Advertisement
Table of Contents
