Oled-Display; Network; Connection Via Network Cable - Dreambox DM820 HD User Manual

controlled by HDMI If the connected HDMI device supports the format AC3+, the AC3+ signal will
be forwarded without altering it, otherwise the AC3+ stream will be converted to a AC3 stream.
OSD visibility With the Navigation-Buttons (
Scaler sharpness With the Navigation-Buttons (

6.5 OLED-Display

1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (
3. With the Navigation-Buttons (
4. With the Navigation-Buttons (
Now you can set the brightness of the OLED-display for standby and operation mode.
Operation
1. With the Navigation-Buttons (
2. With the Navigation-Buttons (
Idle Mode
1. With the Navigation-Buttons (
2. With the Navigation-Buttons (

6.6 Network

6.6.1 Connection via network cable

Adapter-Settings
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (
3. With the Navigation-Buttons (
4. With the Navigation-Buttons (
5. Use the Navigation-Buttons and the Numeric-Keypad to change the settings.
Wired This option toggles the integrated ethernet interface on and off.
) you can change the transparency of the gui.
) you can change the sharpness of the screen.
) choose the option "Setup" and press the OK-Button.
) choose the option "System" and press the OK-Button.
) choose the option "Display Setup" and press the OK-Button.
) choose the option "Operation".
) choose the brightness of the OLED-Display for operation mode.
) choose the option "Idle Mode".
) choose the brightness of the OLED-Display for idle mode.
) choose the option "Setup" and press the OK-Button.
) choose the option "Network" and press the OK-Button.
) choose the option "Network Setup" and press the OK-Button.
48