Key Functions - HCIFitness PhysioStep LXT Owner's Manual

Key Functions

There are a total of 6 keys on the monitor; UP, DOWN, ENTER, START/STOP, RECOVERY
AND MODE.
A. UP (▲): Selects or increases the values of PROGRAMS, TIME, WATT, CALORIES,
TARGET HEART RATE, AGE, DISTANCE.
B. DOWN (▼): Selects or decreases the values of PROGRAMS, TIME, WATT, CALORIES,
TARGET HEART RATE, AGE, DISTANCE.
C. ENTER: Selects the functions from PROGRAMS, TIME, WATT, CALORIES, TARGET
HEART RATE, AGE, DISTANCE and 10 columns. The selected function will flash.
Please note that not all of the functions can be selected in every program.
D. START/STOP: Starts or stops the program that was selected. Pressing this button for 2
seconds will reset the monitor.
E. MODE: Changes the display of the values between CALORIES or WATTS. The values of
RPM and WATTS show at the same time.
Display/Monitor
A. START: Indicates the program selected has started.
B. STOP: Indicates the program selected has stopped.
C. PROGRAM: Indicates the programs selected from PROGRAM 1 to PROGRAM 16.
D. LEVEL: Indicates the level of resistance selected from LEVEL 1 to LEVEL 16.
E. TIME Display: Indicates only 1 value of TIME displayed depending on the program.
F. DISTANCE/FAT%: Indicates only one value of DISTANCE, ODOMETER or FAT% displayed
depending on the program.
G. RPM/SPEED: Indicates the value of RPM or Speed.
11