Mercedes-Benz G 55 AMG Operator's Manual page 192

Installation behind front seats
1 Partition net
2 Mounting
Fold rear seat bench fully forward
( page 188).
Engage partition net 1 in
mountings 2.
3 Lift tensioner
4 Tie down
5 Hook
6 Ring
Lift tensioner 3 must point in the direc-
tion of the cargo compartment.
Set the length of tie downs 4 and lift
tensioner 3 to the rings 6.
Insert tie down hooks 5 in rings 6.
Pull loose ends of tie downs 4 until
net is tight.
After driving a short-distance, check the
tension of the partition net, retighten if
necessary.
Controls in detail
Removing partition net
Lift tensioner upward to a horizontal
position to release tensioning of strap.
Disengage tie down hooks from rings.
Remove partition net from mountings.
Storing partition net
Roll up partition net and secure it.
Store partition net behind rear seat
bench.
Loading
191