Mercedes-Benz G 55 AMG Operator's Manual page 191

Controls in detail
Loading
Installation behind rear seat bench
1 Partition net
2 Mounting
Fold the rear seat bench forward
( page 188).
i
This cannot be done by folding the rear
seat backrest forward.
Hook partition net 1 in mountings 2
on both sides.
190
3 Lift tensioner
4 Tie down
Lift tensioner 3 on tie downs 4 must
point in the direction of the arrow.
5 Hook
6 Ring
Set the length of the tie downs 4 and
lift tensioner 3 to the rings 6.
Insert tie down hooks 5 in rings 6.
Pull on loose ends of tie downs until net
is slightly tensioned.
Fold up seat bench until it locks in
place.
The partition net will be tightened by
the rear seat bench cushion.
After driving a short period, check the ten-
sion of the partition net, retighten if neces-
sary.