Menu Structure; Operation - LDDE Nano*Pix 1440 HP / 2880 HP User Manual

Menu Structure

Nano*Pix DMX Address
www.ldde.com
Manual
Mode
Reset to Temperature
Factory Default?
DMX Address
Channelmode
PWM Frequency
Quiet Mode
Manual Mode
Test Mode
Standalone Mode
Control Channel
Fade to Zero
Factory Default
Temperature
Software Version
Display Rotate

Operation:

Display
The menu is controlled with the following 5 keys: Up, Down, Left, Right and OK
You can alternate between items in the main menu with the keys Left / Right.
If you want to change a setting, press OK and menu item will begin flash. Change the setting with Up / Down
and press okay to save.
While the system saves the new setting, the word "Saving..." will appear in the lower half of the display.
Rev 7/2014 V4.4
| Specifications subject to change without notice.
Channelmode
1-512 __channelmode
Test Standalone
Mode Mode
Software Version
___ °C V 4.4
DMX address, 1 - 512
see table
PWM Frequency, 750Hz, 1500Hz, 3000Hz
deactivates fan
Manual 7 channel mode (including Strobe)
Single Colour Test / adjustable speed
10 set colours, adjustable intensity
Remote control of Quiet Mode / Frequency / Fade
Automatic fade to 0
Reset to factory defaults
Current temperature – updated every 10 sec
Current Software Version
Rotates the display (180 °)
PWM Frequency
___ Hz
Control channel
ON / OFF
Display Rotation
ON / OFF
Up
Left
Down
Quiet Mode
ON / OFF
Fade to Zero
ON / OFF
Tech Support
service@ldde.com
Right
OK
Seite 8