Product Description Thank you for choosing this LDDE Nano*Pix 1440 HP / 2880 HP fixture. The Nano*Pix LED - Softlight battens present a milestone in the area of modern lighting for stage, events and studio use. The revolutionary LED-Softlight technology is the ideal solution to substitute conventional battens using RGBW fluorescent tubes.
Do not use optical devices or other means of focussing the LED beam apart from products supplied for this purpose by LDDE Do not attempt to repair or dismantle the Nano*Pix 1440 HP / 2880 HP fixture: Opening and removing the internal covers can result in electrocution or other serious injuries.
Installation using mounting bracket The Nano*Pix 1440 HP / 2880 HP is fitted as standard with two mounting brackets on the back of the housing. These can be positioned along any point of the profile and offer maximum flexibility.
- SpectraConnecT5 and SpectraConnecT5LED - SpectraLED72 and SpectraLED144 This offers the possibility to use cables that you may already have in stock with the Nano*Pix 1440 HP / 2880 HP fixtures. Different fixtures can be connected using the same cabling system.
Menu Structure Nano*Pix DMX Address Channelmode PWM Frequency Quiet Mode www.ldde.com 1-512 __channelmode ___ Hz ON / OFF Manual Test Standalone Control channel Fade to Zero Mode Mode Mode ON / OFF ON / OFF Reset to Temperature Software Version...
DMX Address This menu allocates the DMX start address between 1 and 512. Channelmode Nano*Pix 2880 HP Channelmode Description R, G, B, joint WW and CW, no master, no strobe Master, R, G, B, joint WW and CW, strobe 16 bit mode, R, G, B, joint WW and CW, 2 channels, no master, no strobe R, G, B, WW, CW, no master, no strobe 16 bit mode, R, G, B, WW, CW, 2 channels, no master, no strobe Master, R, G, B, WW, CW, strobe...
Control Channel Activation of the control channel allows the remote control of a variety of functions, using an additional DMX channel. The "Channel Mode" menu displays this message: "xx Ch +Contr Ch". Controls: 1. Set Control Channel to the desired value (see table below) 2.
Standalone Mode Standalone Mode facilitates the configuration of 10 different set colours Magenta Lavender CT Blue Light Green Cyan Yellow Light Yellow Amber Warm White Cold White Fade to Zero New DMX value of 0 (below DMX value 15) causes snap to 0 New DMX value of 0 (below DMX value 15) causes fade to 0 PWM Frequency...
Operating errors or damage caused by improper use or negligence. LDDE declines any liability for damages to the fixture as well as consequential damages which result from negligence, improper use and setup, wrong setting into operation and use, ignoring of valid safety regulations and unsuitable use Seite 12 Rev 7/2014 V4.4...
Technical Specifications Illuminant Nano*Pix 1440 HP: 1440 LEDs 288 each of red, green, blue, warm white and cool white Nano*Pix 2880 HP: 2880 LEDs 576 each red, green, blue, warm white and cool white Power Input: Voltage Input 100-250 VAC / 50/60 Hz Nano*Pix 1440 HP 115 W full load Nano*Pix 2880 HP...