Gain; Ch Input(1-8) [Dbu] - Yamaha MG16/6FX Service Manual

MG16/6FX
•ST CH (13/14,15/16)
EQ(HIGH,HI-MID,LO-MID,LOW) level control
AUX1,AUX2 level control
AUX2 PRE switch
EFFECT level control
PAN/BAL control
ON switch
PFL switch
1-2 switch
3-4 switch
Fader
•DIGITAL EFFECT
PROGRAM select switch
PARAMETER control
AUX1,AUX2 level control
ON switch
PFL switch
1-2 switch
3-4 switch
EFFECT RTN Fader
•MASTER control
GRAPHIC EQALIZER gain control
GEQ switch
RETURN to AUX1,AUX2,ST level control
2TR IN to ST level control
GROUP 1-2,3-4 TO ST assign switch
GROUP1-2,3-4 Master Fader (60mm)
C-R/PHONES level control
C-R OUT source select switches
ST Master Fader
•Others
PHANTOM switch

4.2 Gain

The output levels shall be within the range specified in the Table 4.2-1 to 4.2-6.
Table 4.2-1 CH INPUT(1-8) [dBu]
INPUT
INPUT Gain
level
-80 MAX
q
MIC
-36 MIN
LINE -54 MAX
1 Measure with the PAN control set at the center position. For others, turn the PAN control counterclockwise fully for the
ST L and the odd number of GROUP OUT and turn it clockwise fully for the ST R and the even number of GROUP OUT.
2 PFL switch to ON.
3 Set the 1-2 (3-4) switch to ON and the C-R/PHONES Output and Meter Select switch to GROUP 1-2(3-4). Measure
only the case of CH1.
4 Measure only the case of CH1.
30
CENTER
MAX
OFF(POST)
MAX
L(turned counterclockwise fully)
ON(LED shall light) when taking measurement only/ OFF otherwise
ON(LED shall light) when taking measurement only/ OFF otherwise
ON when taking measurement only/ OFF otherwise
ON when taking measurement only/ OFF otherwise
MAX
1
MIN
MAX when taking measurement only/ MIN otherwise
ON(LED shall light) when taking measurement only/ OFF otherwise
ON when taking measurement only/ OFF otherwise
ON when taking measurement only/ OFF otherwise
ON when taking measurement only/ OFF otherwise
MAX when taking measurement only/ MIN otherwise
CENTER
ON(LED shall light) when taking measurement only/ OFF otherwise
MAX when taking measurement only/ MIN otherwise
MAX when taking measurement only/ MIN otherwise
OFF
MAX
MAX
ST
MAX
OFF
ST L OUT ST R OUT GROUP1-4 AUX1
+1 ± 2 *1 +1 ± 2 *1
GROUP TO ST,1-2(3-4) ON
+14 ± 2 *4 +14 ± 2 *4
+1 ± 2 *1
–
+1 ± 2 *1
–
AUX2
PRE OFF PRE ON
+4 ± 2 -4 ± 2 +6 ± 2
– – –
– – –
– – –
C-R OUT
EFFECT
*2
-4 ± 2 +6 ± 2 0 ± 2
– – –
– – –
– – –
C-R OUT
*3
+20 ± 2
–
–
–