Advertisement
The Kam KWM1932 V2 uses one of the following two UHF frequencies sets
Option A: 863.3 and 863.8Mhz or...
Option B: 864.3 and 864.8 MHz
Receiver
1. Power LED indicator
2. RF LED indicators
3. Channel volume controls
4. Advanced dipole antenna system
5. Balanced output jack sockets (3-pin XLR)
6. Unbalanced 6.3mm jack for mixed output
7. DC power supply input socket (12.5-18V, 300ma)
8. Power On/Off switch
Handheld microphone transmitter
9. Battery compartment for two AA1.5V alkaline batteries
10. Off/Mute/On allows convenient audio muting
11. Low Battery LED Indicator
Bodypack transmitter
12. Bodypack antenna
13. Locking connector
14. LED indicator for power and battery status
15. On/Off switch
16. Output control
17. Battery compartment for two AA1.5V alkaline batteries
Advertisement
