Page 1
For the latest updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
Page 2
Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you.
Page 3
KWM1935 - front panel Power switch Channel selector panel (see below for channel selection instructions) Power status LED RF signal indicator led - lights when the receiver is receiving a signal from the transmitter. Volume control KWM1935 - rear panel Power inlet Squelch sensitivity adjust.
Page 4
There are 16 channels available and each channel has a specific frequency factory assigned to it. Both the KWM1935 & KWM1940 use the same 16 frequencies. The table below shows the 16 different channels, the frequencies assigned to those channels and the various DIP switch settings used to choose a particular channel.