Page 1
For the latest updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
Page 2
Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you.
Page 3
The Kam KWM1932 V2 uses one of the following two UHF frequencies sets Option A: 863.3 and 863.8Mhz or… Option B: 864.3 and 864.8 MHz Receiver 1. Power LED indicator 2. RF LED indicators 3. Channel volume controls 4. Advanced dipole antenna system 5.
Page 4
Operation Before operating the system ensure that you have installed fresh batteries in the transmitters. Receiver operation 1. Connect outputs for channel A and B to your mixer/amplifier, either two balanced XLR cables for dual output or a single unbalanced 1/4 inch jack plug cable for mixed output of both channels. 2.