Usb Audio Mode - wiREVO HSH2000 User Manual

USB audio mode

[How to set USB audio mode]
1.Switch ON ( ) with pressing and holding Volume Down (
until the first indicator light is on.
2. When the Bluetooth stereo dongle is turned on as USB audio mode, red and purple indicator lights flash in turn with one
another 3 times before going to the normal state.
3.The stereo dongle will keep USB audio mode if you don't change it to analog audio mode.
When you plug the stereo dongle into the USB port of a non-Bluetooth device for the first time, it will install USB Audio
Device Drivers automatically and additional USB Driver is not needed. Installed Audio Device's name is "wiREVO
Note
Bluetooth Stereo Audio". If it is not selected automatically when plugged in, you may need to select the Audio device
by manual.
Plug the Bluetooth stereo dongle into the USB port of a non-Bluetooth device
using the USB cable supplied with the stereo dongle.
Possible function:
wireless stereo & wireless remote control (Play/Pause/Stop,Forward/Backward)
Cannot adjust volume level of the stereo dongle. Adjust non-Bluetooth device's
volume level.
Can be charged while using.
Better audio quality compared to the Analog audio mode.
Using the stereo dongle
) button and Menu ( ) button together