Usb Audio Mode; Volume Control - wiREVO D1000V User Manual

2. Volume control

1. Press Volume Up (
2. When it reaches the maximum or minimum volume level, purple indicator light flashes once.
3. You may need to adjust non-Bluetooth device's - Computer, PDA, Mobile phone, etc. - volume level not to be saturated.
When you do not listen to music, press and hold Menu (
button) of the wiREVO stereo headset to save power consumption of both the dongle and the stereo headset.

USB audio mode

Plug the Bluetooth dongle into the USB port of a non-Bluetooth device using the USB cable supplied with the dongle.
Possible function:
- wireless stereo & wireless remote control (Play/Pause/Stop, Forward/Backward)
Cannot adjust volume level of the dongle. Adjust non-Bluetooth device's volume level.
Can be charged while using.
Better audio quality compared to the Analog audio mode.
1. How to set
1. Switch ON (
indicator light is on.
2. When the Bluetooth dongle is turned on as USB audio mode, red and purple indicator lights flash in turn with one another 3 times before going
to the normal state.
3. The dongle will keep this mode if you don't change it to another mode.
When you plug the dongle into the USB port of a non-Bluetooth device for the first time, it will install USB Audio Device Drivers automatically
and additional USB Driver is not needed. Installed Audio Device's name is "wiREVO Bluetooth Stereo Audio". If it is not selected
automatically when plugged in, you may need to select the Audio device by manual.
18
) button or Volume Down (
) with pressing and holding Volume Down (
) button to adjust the volume of the dongle while listening to music.
) button of the dongle or do STOP operation (press and hold Play/Pause/Stop
) button and Menu ( ) button together until the first