Elation Platinum Spot LED Manual page 35

- "PAN-Fine" – precision pan movement.
- "TILT" – tilt movement.
- "TILT-Fine" – precision tilt movement
- "Move Speed" – adjust pan and tilt motor speed
- "Gobo Wheel 1" – select gobos from gobo wheel 1
- "Gobo Rot. 1" – adjust gobo 1 indexing or rotation
- "Gobo Wheel 2" – select a gobo from gobo wheel 20
- "Prism" – select a prism, prism macro, or frost
- "Prism Rot." – adjust the prism indexing or rotation
- "Color Speed" – adjust the CMY mixing speed
- "Color Macro" – select a built-in color mixing macro
- "Color Wheel" – select a color from the color wheel
- "Iris" – adjust the iris value
- "Focus" – adjust the focus value
- "Strobe" – adjust the strobe
- "Dimmer" – adjust the dimmer intensity
- "Scene Time" – set the hold time for the scene
- "Input By Out" – this function will store a scene from an external DMX
console. See the next section for scene editing via an external DMX
controller.
Step 1B – Building Scenes from an External DMX Controller
The fixture includes a simple built-in DMX recorder. This recorded allow you to build a scene
using your own DMX console and then send that scene to the fixture to be stored inside one
of the fixture scene storage banks. Many people may find this procedure easier and quicker
than using the on board menu functions as in "Step 1." To store a scene from an external
DMX controller follow the procedures below:
- Using your DMX control build and store scenes as you normally would.
- Once you have built all your required scenes, enter the fixtures main menu
and toggle to
Step 2 – Editing Programs.
©Elation Professional, Los Angeles Ca. 35
Platinum Spot LED™
www.ElationLighting.com