Raveon RV-M7-UC-GX Quick Start Manual page 3

GPS Common Default
Mode Usage Serial Port
Baudrate
GPS 1 Transponder 4800
Simple
tracking, AVL,
security.
GPS 2 PC / Base 38400
Station
Proprietary
interface for PC
applications that
monitor M7
Transponders.
GPS 3 Marine Radar 38400
Displaying the
location of M7
transponders
on a ship
RADAR
screen.
GPS 4 GPS Display 4800
Lowrance and
Garmin GPS
displays.
Mobile
displays.
GPS 5 38400
-LX No GPS
module
Lowrance and
Garmin GPS
displays. Radar
displays. Mobile
displays.
M7 GX Quick Start Guide
Output Description
Message
GSV, Transmit only in this mode.
GLL The receiver is off and
GPS is turned off between
transmissions. This is the
lowest-power consuming
mode. No RX.
PRAVE Connect the M7 GX to a
PC computer running
RavTrack PC (or a custom
application), The PRAVE
message is in NMEA
format, and provides
location and status
information for every
transponder it receives.
TLL Connect the M7 GX to a
marine RADAR display or
plotter with a serial port,
and waypoints will appear
on the GPS screen at the
location of all M7 GX
transponders within radio
range. The display must
support the NMEA 0183
TLL message.
WPL Connect the M7 GX to a
mobile or hand-held GPS
with a serial port, and
waypoints will appear on
the GPS screen at the
location of all M7 GX
transponders within radio
range.
PRAVE
Connect the M7 GX to a
PC running RavvTrack PC,
or change the message to
WPL and use with a GPS
display. No internal GPS,
so no positions/status
transmissions.
3
Raveon Technologies Corp.