Installing The Cam Stack Assembly And Cycle Lever Assembly - Kodak EKTAGRAPHIC III AM Service Manual

HALF-CYCLE
LEVER
HALF-CYCLE
LEVER SPRING
CYCLE
LEVER
PLUNGER
SPRING
PLUNGER
CYCLE
SOLENOID
SCREW (2)
INDEX LEVER
and SPRING
(not shown)

Installing the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY

Caution
Keep both the CYCLE LEVER ASSEMBLY and the HALF CYCLE LEVER together and observe the orientation of
both LEVERS.
[1] Do the replacement procedure for the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY in reverse
order.
SM4530-1 – 30APR96
[20] Remove the 2 SCREWS from the CYCLE
[21] Remove the CYCLE SOLENOID.
[22] Slide the PLUNGER and PLUNGER SPRING off
E-RING (2)
[23] Remove the HALF CYCLE SPRING between the
[24] Disconnect the INDEX LEVER SPRING from the
[25] Push the INDEX LEVER back.
[26] Remove the 2 E-RINGS:
Keep both the CYCLE LEVER ASSEMBLY and the
HALF CYCLE LEVER together and observe the
orientation of both LEVERS.
[27] Slide both the CYCLE LEVER and HALF CYCLE
A091_0009CCA
A091_0009CA
Replacements and Installations
SOLENOID.
the CYCLE LEVER.
CYCLE LEVER ASSEMBLY and the HALF
CYCLE LEVER.
MECHANISM ASSEMBLY.
• 1 on the CYCLE LEVER ASSEMBLY
• 1 on the HALF CYCLE LEVER
Caution
LEVER off the SHAFT.
17