Figure 12 Menu > Authentication; Table 7 Menu > Authentication - ZyXEL Communications MAX-706 User Manual

To access this screen click the
below displays.
Figure 12 Menu > Authentication
The following table describes the labels in this screen.
Table 7 Menu > Authentication
LABEL
User
Password
Anonymous Identity
PKM
Authentication
MAX-706 User's Guide
icon on the main menu then Authentication. The screen
DESCRIPTION
Type the user name associated with your Internet access account.
Type the password associated with your Internet access account.
Type the anonymous identity provided by your Internet Service Provider.
Anonymous identity (also known as outer identity) is used with EAP-TTLS
encryption (Extensible Authentication Protocol - Tunnelled Transport Layer
Security). The anonymous identity is used to route your authentication request
to the correct authentication server, and does not reveal your real user name.
Your real user name and password are encrypted in the TLS tunnel, and only
the anonymous identity can be seen.
Leave this field blank if your ISP did not give you an anonymous identity to use.
This field displays the the Privacy Key Management version number the MAX-
706 uses for user authentication. See the WiMAX security appendix for more
information.
Select the user authentication method to be used. Check with your service
provider if you are unsure of the correct setting for your account.
The MAX-706 supports the following user authentication methods:
• EAP_TYPE_TTLS (Tunnelled Transport Layer Security)
• EAP_TYPE_TLS (Transport Layer Security)
Chapter 3 WiMAX Utility
33