License Plate Lamp
1. Remove the two screws holding
each of the license plate lamps
to the molding that is part of the
liftgate.
2. Twist and pull the license plate
lamp assembly forward through
the molding opening.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise.
4. Pull the bulb straight out of the
socket and install the new bulb.
5. Reverse Steps 1 through 3 to
reinstall the license plate lamp.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
Replacement Bulbs
If the vehicle is a hybrid, see the
hybrid supplement for more
information.
Exterior Lamp
Number
Back-up Lamp
License Plate Lamp
Rear Turn Signal
Lamp, Taillamp, and
Stoplamp
Side Marker Lamp
For replacement bulbs not listed
here, contact your dealer.
10-39
Bulb
7441
W5WLL
3057K
194