Automatic Transmission - Chevrolet 2012 Suburban Owner's Manual

Hide thumbs Also See for 2012 Suburban:
Table of Contents

Advertisement

9-32
Driving and Operating
Automatic
Transmission
If the vehicle is a hybrid, see the
hybrid supplement for more
information.
If the vehicle is has an automatic
transmission, it has an electronic
shift position indicator within the
instrument panel cluster. This
display comes on when the ignition
key is turned to the ON/RUN
position.
There are several different positions
for the shift lever.
Heavy Duty 6-Speed Automatic
Transmission Shown (Light Duty
Similar)
See Range Selection Mode under
Manual Mode on page 9 35.
P (Park): This position locks the
rear wheels. It is the best position to
use when starting the engine
because the vehicle cannot move
easily. When parked on a hill,
especially when the vehicle has a
heavy load, you might notice an
increase in the effort to shift out of
P (Park). See Torque Lock under
Shifting Into Park on page 9 27 for
more information.
I n f o r ma t i o n P r o v i d e d b y :
WARNING
It is dangerous to get out of the
vehicle if the shift lever is not fully
in P (Park) with the parking brake
firmly set. The vehicle can roll.
Do not leave the vehicle when the
engine is running unless you
have to. If you have left the
engine running, the vehicle can
move suddenly. You or others
could be injured. To be sure the
vehicle will not move, even when
you are on fairly level ground,
always set the parking brake and
move the shift lever to P (Park).
See Shifting Into Park on
page 9 27. If you are pulling a
trailer, see Driving Characteristics
and Towing Tips on page 9 70.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents