Chevrolet Camaro 2012 Owner's Manual page 178

7-20 Infotainment System
3. After the system determines
what type of Bluetooth device is
being paired, the Bluetooth
device will need to be put into
discovery mode.
4. Some devices may require a
personal identification number
(PIN) in order to complete the
pairing process. Locate the
device named GMusicConnect
in the list on the Bluetooth
device and follow the
instructions on the device to
enter the four digit PIN provided
by the infotainment system.
Connecting to a Device
Once a device is paired to the
infotainment system, it can be
connected to the infotainment
system.
To connect a paired device when no
other device is connected to the
infotainment system:
1. Select the Select Device option
from the Bluetooth Music
Setup menu.
2. Select the new device.
To connect a paired device when
another device is connected to the
infotainment system:
1. Select the Select Device option
from the Bluetooth Music
Setup menu.
2. Select the new device.
3. The active device is
disconnected from the system
and the new device is
connected.
I n f o r ma t i o n P r o v i d e d b y :
Removing a Device
1. Select Remove Device from the
Bluetooth Music Setup menu.
2. Select the device.
3. The device is removed from the
system.
Before connecting to the removed
device again, it will need to paired
to the infotainment system.
Changing the Default PIN
To change the default PIN:
1. Select Change Default PIN from
the Bluetooth Music
Setup menu.
2. Select a pre defined PIN,
or select Other to create a PIN.
To create a PIN:
1. Select the length of the PIN.
2. Enter the character sequence.