D-Link DCS-3511 User Manual page 58

Configuration
Media name: Enter a name for the media setting.
Media Type: There are three choices of media types available: Snapshot, Video Clip,
and System log. Select the item to display the detailed configuration options. You
can configure either one or all of them.
Snapshot: Select to send snapshots when a trigger is activated.
Source: Select to take snapshots from stream 1 ~ 4.
Send pre-event images: The camera has a buffer area. It temporarily holds data up
to a certain limit. Enter a number to decide how many images to capture before a
trigger is activated. Up to 7 images can be generated.
Send post-event images: Enter a number to decide how many images to capture
after a trigger is activated. Up to 7 images can be generated.
File name prefix: Enter the text that will be appended to the front of the file name.
Add date and time suffix to the file name: Select this option to add a date/time
suffix to the file name.
Click Save to enable the settings, then click Close to exit the page.
Video clip: Select to send video clips when a trigger is activated.
Source: Select a source of video clip.
Pre-event recording: The camera has a buffer area. It temporarily holds data up to a
certain limit. Enter a number to decide the duration of recording before a trigger is
activated. Up to 9 seconds can be set.
D-Link DCS-3511/DCS-3530 User Manual 58