GoPro Smart Remote User Manual page 18

/ Connecting the Remote and Your GoPro
After your remote and camera are paired, follow the steps below to connect
them in the future. With this procedure, your camera connects to the remote
that it connected to most recently.
To Connect the Remote and Your HERO4:
1. Power on the remote and your camera.
2. On your camera, complete these steps:
a. Press the Power/Mode button [
then press the Shutter/Select button [
b. Press the Power/Mode button [
press the Shutter/Select button [
c. Press the Power/Mode button [
App, and then press the Shutter/Select button [
18
] to cycle to Setup mode, and
] to select it.
] to cycle to Wireless, and then
] to select it.
] to cycle to WiFi RC or RC &
] to select it.