GoPro Smart Remote User Manual page 14

To Pair Your Remote and Your HERO4:
1. Ensure that both camera and remote are powered off.
2. On your camera, complete these steps:
a. Press the Power/Mode button [
b. Press the Power/Mode button [
then press the Shutter/Select button [
c. Press the Power/Mode button [
press the Shutter/Select button [
d. Press the Power/Mode button [
App), and then press the Shutter/Select button [
If the camera was never paired with a remote or the GoPro App, it
automatically begins pairing. Otherwise, cycle to New (or New RC)
and select it to begin pairing.
3. On the remote, complete these steps:
a. Power on the remote. If the remote was never paired with a
14
] to power on your camera.
] to cycle to Setup mode, and
] to select it.
] to cycle to Wireless, and then
] to select it.
] to cycle to WiFi RC (or RC &
] to select it.