Table of Contents
Advertisement
Problems Transferring Pictures
Transferring Pictures
Problem
Cannot transfer
pictures to the
computer.
44
Chapter 6
Cause
The Transfer button was
not pressed.
The AC power adapter
or USB cable is not
securely connected.
The camera is not
properly seated.
The camera was
removed from the
printer dock during
picture transfer.
There are too many
applications running on
your computer.
The software is not fully
or correctly installed on
the computer.
Action/Solution
Press the Transfer button.
Check the connections
(page
25) and try again.
Place the camera on the
printer dock
(page
readjust the camera
placement.
Replace the camera on the
printer dock
(page
try again.
Close all software
applications and try again.
1
Disconnect the USB cable
from the printer dock.
2
Close all software
applications.
3
Uninstall the software
(page
21).
4
Re-install the Kodak
EasyShare printer dock
software
(page
5
Reconnect the USB cable
to the printer dock
(page
25).
14) or
14) and
21).
Advertisement
Table of Contents
