Getting Started - JVC KD-AR755 Instruction Manual

GETTING STARTED

1
Cancel the demonstration
1 Press and hold MENU.
2 Turn the volume knob to select [DEMO], then press the knob.
3
Turn the volume knob to select [DEMO OFF], then press the knob.
4
Press MENU to exit.
2
Set the clock
1
Press and hold MENU.
2 Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK SET], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [24H/ 12H], then press the knob.
6
Turn the volume knob to select [12 HOUR] or [24 HOUR], then press the
knob.
7 Press MENU to exit.
3
Set the basic settings
1 Press and hold MENU.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
4
CLOCK
CLOCK ADJ AUTO: The clock time is automatically set using the Clock Time (CT) data in
FM Radio Broadcast Data System signal. ; OFF: Cancels.
CLOCK DISP ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
SETTINGS
BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SRC SELECT
AM *
ON: Enables AM in source selection. ; OFF: Disables.
PANDORA * (For KD-AR755 / KD-R750 / KD-R650)
ON: Enables PANDORA in source selection. ; OFF: Disables.
IHEART *
(For KD-AR755 / KD-R750 / KD-R650)
ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
AUX *
ON: Enables AUX in source selection. ; OFF: Disables. ; BT ADAPTER: Select
when the KS-BTA100 Bluetooth adapter is connected to the auxiliary input
jack ( 8). The source name will change to BT AUDIO.
F/W UPDATE
SYSTEM
F/W xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
* Not displayed when the corresponding source is selected.
Default: XX