Connection; Wiring Connection - JVC KD-AR755 Instruction Manual

Wiring connection

KD-AR755 KD-R750 / KD-R650
Rear output
Front output
Subwoofer output
Vehicle dashboard
Factory wiring
harness (vehicle)
Blue: To power antenna
Blue/white: To amplifier
Vehicle-specific Wiring
Harness (separately
purchased)
For more information:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
KD-AR555 / KD-R450
Front output
Rear/subwoofer
Rear/subwoofer
output
output
Antenna terminal
To the steering
Light blue/yellow
wheel remote
STEERING
control adapter
WHEEL
REMOTE
Recommended
Join the same color wires together.

connection

Blue/white: Remote (200 mA max.)
Orange/white: Illumination
Brown: Tel muting
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
Green/black
Purple: Rear speaker (right)
Purple/black
Signal cord (not supplied)
Fuse (10 A)
KD-AR755 / KD-R750 /
KD-AR555 only
Part list for
installation
JVC Amplifier (A) Faceplate
(B) Trim plate
Remote wire
(not supplied)
(C) Mounting sleeve
Ignition switch
(D) Wiring harness
Car fuse block
Separate
red wire
(E) Extraction key
Make this connection if
your vehicle factory wiring
harness does not have
"12 V ignition switch" wire.
ENGLISH | 19