Rack Dry - Samsung PowerFoam WF405ATPA series User Manual

RACK DRY

Installing the drying rack
1. Open the dryer door.
2. Position the drying rack in tumbler, placing the front lip of the drying rack on the top of the lint
filter.
3. Place the rear legs in the two recessed areas of the dryer's back wall then push down the
middle of the drying rack to fix it in place.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the dryer door.
6. Press the RACK DRY button in the Tiime Dry cycle and then select the time according to the
moisture and weight of the items. The drying rack can be also used with the Air Fluff cycle..
SUGGESTED ITEMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Stuffed toys
(foam or rubber-filled)
Foam rubber pillows
Sneakers
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items
and lead to a fire hazard.
WARNING
No drying rack is provided for the DV393 model.
DV405ETPAWR-03021F-02_EN.indd Sec13:29 DV405ETPAWR-03021F-02_EN.indd Sec13:29
Drying Rack
Door
SUGGESTED TEMP. SETTINGS
Extra Low ( Time Dry cycle)
Extra Low ( Time Dry cycle)
Air Fluff
Air Fluff
Air Fluff
operating Instructions, tips _29
2012-06-28 2012-06-28 5:07:05 5:07:05