Setting Up Anynet - Samsung 4 series User Manual

Setting Up Anynet +

The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1. Press The TOOLS button. Then Press the ENTER
to select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
. Press the ENTER
then press the ENTER
. Press the ▲ or ▼ button to select "On", then press the
ENTER
➣
The "Anynet+ (HDMI-CEC)" function is enabled.
➣
If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
➣
When the "Anynet+ (HDMI-CEC)" function is disabled, all the
Anynet+ related operations are deactivated.
Turning an Anynet+ Device Off Automatically when the TV is Turned Off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press
the ENTER
. Press the ▲ or ▼ button to select "Yes", then press the
ENTER
➣
The Auto turn off function is enabled.
➣
If you select "No", the Auto turn off function is cancelled.
Press the EXIT button to exit.
➣
The Select Device setting of the TV remote control is to be set
to TV to use the Anynet+ function.
➣
If you set "Auto Turn Off" to "No", connected external devices
are also turned off when the TV is turned off. However, if the
device is recording, it may not be turned off.
Downloaded From TV-Manual.com Manuals
button.
button to select "Anynet+ (HDMI-CEC)",
button.
button.
button.
button.
button
English - 7
Tools
Anynet+ (hDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Enter
TV P9
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver :Off

Setup

Move Enter
Return
Setup
Anynet+ (hDMI-CEC) : Off
Auto Turn Off : Off
Searching Connections
Move Enter
Setup
Anynet+ (hDMI-CEC) : On
Auto Turn Off : Off
Searching Connections
Move Enter
Exit
Off
On
Return
No
Yes
Return