Advertisement
Quick Links
Safety, Installation and Operating Instructions
Manual for the Following Battery Charger Models:
i1215BSBDUAL, i1215BSBTRI, i1215BSBQUAD, i615BSBDUAL and
_______________________________________
IMPORTANT NOTICE:
Please save and read these safety, operating and installation instructions before installing or
applying AC power to your Pro Charging Systems (PCS) charger. Contact technical support at
PCS with any product, installation, or service questions (800.742.2740).
i615BSBQUAD.
Pro Charging Systems, LLC
LaVergne, TN 37086-3539
070914
Advertisement
Related Manuals for PRO Charging System i1215BSBDUAL
Summary of Contents for PRO Charging System i1215BSBDUAL
- Page 1 Safety, Installation and Operating Instructions Manual for the Following Battery Charger Models: i1215BSBDUAL, i1215BSBTRI, i1215BSBQUAD, i615BSBDUAL and i615BSBQUAD. _______________________________________ 070914 IMPORTANT NOTICE: Please save and read these safety, operating and installation instructions before installing or applying AC power to your Pro Charging Systems (PCS) charger. Contact technical support at PCS with any product, installation, or service questions (800.742.2740).
- Page 2 FOR THE FOLLOWING BATTERY CHARGING SYSTEMS: MODEL AC SUPPLY DC Output Battery System Total Series Battery Capacity Capability* i1215BSBDUAL 120 volts, 60 Hertz Two 15 amp Banks 12 volt, 6 cell 24 volts 75-150 ah(20hr rating) i1215BSBTRI 120 volts, 60 Hertz...
-
Page 3: Personal Precautions
When using an extension cord, make sure: 1. That pins on the extension cord plug are the same number, size and shape as those of the charger’s plug; 2. That extension cord meets UL (Underwriters Laboratories, Inc.) acceptance and is in proper operating condition;... -
Page 4: Product Summary
NEVER charge a frozen battery. PREPARING TO CHARGE If it is necessary to remove the battery or batteries to charge, always remove grounded terminal from battery first. Make sure all accessories are off, so as not to cause battery arcing. Be sure the area around any battery is well ventilated while batteries are being charged. -
Page 5: Installation Instructions
The five red LEDs enable you to track the progress of the charge cycle on each battery as the voltage rises. (see the following chart) INSTALLATION INSTRUCTIONS All PCS battery charging systems are designed to be permanently installed in a well-ventilated area and have no mounting restrictions. -
Page 6: Trouble Shooting
(a) With caps securely in place, thoroughly clean the case and posts with a solution of baking soda and water. Be careful not to allow any baking soda to get inside the case. (b) All posts, terminals, and connectors should be cleaned to a shiny bright finish, using a wire brush or sand paper. -
Page 7: Warranty Information
On single bank systems, simply try the charger on another battery. If the charger now operates normally (steady red LEDs or changes to green and holds), this indicates a possible problem with the original battery. If the same bank continues to malfunction, please call our technical support group (800.742.2740). PROBLEM: A green LED was illuminated before disconnecting the power from the charger, but upon reconnection, red LEDs appear and remain on. - Page 8 Below are some of our other options in chargers and battery accessories. Call our technical support group for more detailed information or visit our web site www.pcsdv.com. www.pcsdv.com...