Installation (Pag.17-18); Positioning; Built-In; Ventilation - Foster 2998100 Instruction Manual

Foster e.s.e. built-in coffee machine
Hide thumbs Also See for 2998100:
Table of Contents

Advertisement

Available languages

Available languages

Instruction manual
EN
! It is important to keep this manual for easy reference
at all times. If sold, transferred or moved, make sure
that
the instruction
appliance to inform the new owner on the operation
and its warnings.
! Read the instructions carefully: they contain vital
information on installation, use and safety.

Positioning

! The packaging are dangerous and should be kept
away from children and disposed of according to the
regulations for recycling (see "Precautions and tips").
! The appliance must be installed according to these
instructions and by qualified personnel. Incorrect
installation may cause harm to people, animals and /
or property.

Built-in

To ensure the proper functioning of the device it is
necessary that the cabinet has suitable characteristics:
The panels adjacent to the coffee machine must
be of heat resistant material;
In the case of veneer wooden furniture, the glue
must be resistant to a temperature of 100 °C and
must be resistant to the action of steam;
For embedding of the coffee machine in any type
of installation, the cabinet must have the
following dimensions:
INSTALLATION
manual accompanies the
Page 17 of 28
! Once installed the appliance must not be any contact
with electrical parts. The consumption indications on
the data plate have been calculated for this type of
installation.

Ventilation

To ensure good ventilation is necessary to remove the
rear wall of the compartment. It 'better to install the
coffee machine so that it rests on a flat surface with an
opening on the basis of at least 45 X 540 mm.
Centring and fastening
To center the coffee machine, place the shims to align
the external structure of the machine to the cabinet.
Also make sure that the cabinet of installation
for the appliance, has openings towards the
floor and towards the wall, allowing the free
circulation of an air flow, necessary for the heat
dissipation of the appliance.
! Fix the appliance so as to ensure its perfect stability.
After fixing the machine to the cabinet, top up the
water tank and place the drip tray closing the drawer.
Coffee Machine
To fix the appliance to the
cabinet,
proceed
as
follows:
open the side doors
to
access
the
mounting holes;
open the envelope
provided with the
mounting kit;
tighten the 2 screws
in the 2 holes in the
side panels (left and
right).

Advertisement

Table of Contents
loading

This manual is also suitable for:

2998600

Table of Contents