Changing The Type Of Black Ink - Epson SC-P600 series User Manual

SC-P600 Series User's Guide
System Administration
* indicates the default setting.
Item
Printer Settings Paper Source
Settings
BK Ink Change
Setting
Printer Settings Paper Skew Check
Print Page Line
Paper Size Check
BK Ink Auto
Change
Using the Control Panel
Parameter
Paper Setup On*
Display
Off
Error Notice On
Off*
Normal*
Save Ink
On*
Off
On*
Off
On*
Off
On*
Off
91
Content
Automatically displays the media setup
screen when paper is loaded.
When this is Off, AirPrint is unavailable. Also,
Error Notice from Paper Source Settings
becomes Off.
Set whether or not to display an error if the
paper size or type differ from the printer
settings.
Select Save Ink to reduce the amount of ink
consumed when switching from one black
ink to another. Note, however, that this may
result in uneven gloss in areas printed with
black ink after the switching.
Select Normal to ensure adequate print
quality after switching black inks.
This option only takes effect with fine art
media and poster board.
Select On to display an error in the control
panel's screen when the paper is fed in at a
slant.
On is recommended, as feeding the paper at
a slant can cause the paper to jam.
When this is set to On, a dotted line is printed
on the roll paper.
Select whether or not (On/Off) to detect the
paper width. When this is set to Off, printing
may be performed beyond the edges of the
paper. If printing is performed beyond the
edges of the paper, the inside of the printer
will be soiled with ink. We recommend
setting this to On.
When this is set to On, the black ink is
changed automatically using the Media
Type selected in the printer driver.
"Changing the Type of Black Ink" on
U
page 35
"Supported Media" on page 111
U