Gamber Johnson TabCruzer Installation Instructions

INSTALLATION INSTRUCTIONS

Product
7160-0453, 7160-0453-01, 7160-0453-2, 7160-0453-3
INSTRUCTION SHEET - TABCRUZER
This device is a docking station for your iPad
Defender Series
®
approved 2.1 amp power supply and mini USB cable (not provided).
Slide
Docking Connector
- Failure to open the case connector cover flab prior to inserting the tablet into the tabcruzer may result in damage to the device
and/or the tablet and will void the warrenty.
- You must read and follow all of these installation instructions. Failure to follow the installation instructions may result in serious bodily
injury or death.
- Do not install or use the TabCruzer in the area in which the airbag on the vehicle may be deployed. The installer and user of the
TabCruzer are responsible for installing and using this device outside the area in which an airbag may be deployed.
- Abide by all state and federal laws when mounting and using this device. Do not use this device while operating a motor vehicle.
- Keep these instructions with the product and readily available in the vehicle for future reference of other users of the product.
- Warranted to be free from defects in materials and workmanship for one year. See www.tabcruzer/warranty for more information.
Product Mounting Disclaimer Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program. and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2013 Gamber‐Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
case (GJ Part number 14830). It is designed for use with a Mfi
Lock Button
Mounting Holes
WARNING
Revision
Rev.B
3rd gen) or iPad 2 in an OtterBox
® (
3.5mm Audio
Jack
Form
INST-591
Printing Spec: PS-001
®
Mini USB Jack