Beaming Pictures To Another Handheld - Kodak PALM m500 User Manual

Beaming Pictures to Another Handheld

You can beam your pictures to another PALM Handheld via the IR port. The
receiving handheld must have KODAK PALMPIX Software installed, and must be
at its home screen when receiving.
You can beam only one picture at a time.
Before you begin, make sure that Beam is set to On in the PALM Preferences
(Prefs) menu.
To beam a picture from the Image List—With the Image List displayed,
®
tap Record
To beam the displayed picture—With the picture displayed, tap the check
box for the picture you want to beam, then tap
For more information about beaming pictures, refer to the guides that came
with the PALM Handheld.
NOTE: If the receiving handheld does not have KODAK PALMPIX Software
installed, you can beam the application as well. You need two files for
the application to run—palmpix.prc and palmpixLib.prc. Refer to the
guides that came with the PALM Handheld for information on beaming
applications.
Chapter 4
®
Beam Selected.
®
Beam Image.
5