Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. REV 11/06; REV 12/06 SKU 90757 Page 2...
Page 3
When unpacking, check to make sure the parts listed on page 6 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. SKU 90757 Page 3...
Dies (3, 37-41). FIGURE 3 shows the front side of the unit with the Lower Bending Die (2) installed. FIGURE 2 FIGURE 3 Cutting Slot Bolt (5) Jaw Opening Front Side of Lower Bending Die (2) Lower Bending Die (2) SKU 90757 REV 03/04 Page 4...
3. Periodically check the Shear Brake for signs of wear including cracks, bends, or signs of stress or breakage. Do not use the Shear Brake if faults are discovered. Take the Shear Brake to an authorized service technician if repairs are required. SKU 90757 Page 5...
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. REV 03/04; REV 12/06 SKU 90757 Page 6...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 REV 12/06 SKU 90757 Page 8...
Need help?
Do you have a question about the 90757 and is the answer not in the manual?
Questions and answers