Page 1
ELECTRIC PORTABLE PIPE THREADER Model 93880 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. ELECTRICAL SAFETY Grounded tools must be plugged into an outlet properly installed and SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 2...
Avoid accidental starting. Make sure the Power Cord remains unplugged from its electrical outlet until this product is completely assembled, filled with water, and ready to use. Do not overreach. Keep proper footing and balance at all times. Proper SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 3...
Pipe Threader. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy duty work gloves are available from Harbor Freight Tools. SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 4...
Page 5
It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 5...
The plug and outlet should look like those in the following illustration. (See Figure A.) THIS PRODUCT DOES NOT USE A 3-PRONG ELECTRICAL 110 VOLT, PLUG GROUNDED, ELECTRICAL OUTLET FIGURE A SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 6...
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 7...
Page 8
When unpacking, check to make sure all the parts shown on the Parts List on page 14 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 8...
Page 9
Make sure the accessory Oil Can (59) is filled with Thread Cutting Oil (not included) and ready to be used during the threading operation. DIE INSTALLED (54, 54A, 54B, 54C) FIGURE E SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 9...
Page 10
Located in front of the Power Switch (42) is a Rotation Direction Switch (41) which determines the direction of the threading operation. Turn the Rotating Direction Switch (41) to its right position for a clockwise rotation. (See Figure H.) SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 10...
Page 11
IMPORTANT: Clean any oil spill or splatter that is on the ground. At the end of each job, always clean the Pipe Threader and store the tool in a clean, dry, safe location out of reach of children and other unauthorized people. SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 11...
Die Blades, remove the four Screws on the Die. Remove the Chrome Ring from the Die. Then, remove each of the four Die Blades. Once removed, insert REV 09/06 SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 12...
Rotating Direction Switch not working properly. 1. Have a qualified service technician check the tool for damage and/or defects. Difficulty in removing Die from Pipe Threader. 1. Use a wooden mallet to extract the Die. SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 13...
Wind Shield Pipe Clamp Cross Screw (ST4x80) Stator --------- -------------------------------------------- Oil Can NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 14...
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 15...
Page 16
ASSEMBLY DIAGRAM (CONT.) NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 16...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • P.O. Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 93880 For technical questions, please call 1-800-444-3353 PAGE 17...
Need help?
Do you have a question about the 93880 and is the answer not in the manual?
Questions and answers