Troubleshooting - Stereoping Synth Controller Operation Manual

Welcome
Hello and thanks for buying a 'Stereoping Synth Controller'. We will use 'SSC' as an
abbreviation for 'Stereoping Synth Controller' in this manual. If you purchased a DIY-
assembly kit and are looking for the building instruction ... this is the operation
manual for the finished Controller. To get the building instructions please visit
www.stereoping.com -> Products -> Synth Controller -> Downloads
This manual does not give a detailed introduction into the world of Midi. To fully
understand the manual, we assume you have at least a basic knowledge about Midi.
If you experience problems using this product, have feature wishes, find things
annoying, are missing an SSC-edition for your favourite synth or just want to tell us
you LOVE this product, go ahead. We are looking forward to receiving your Mail!
support@stereoping.com
The manual is divided into the following sections:
1. Overview of the SSC's features
2. Integrating the SSC into your setup
3. Operation
4. The Midi data filter and the Midicontroller change message to SysEx
translator
5. Technical limitations
6. Updating firmware
7. Synth specific addendum
8. Understanding Midi timelags and how to minimize them

9. Troubleshooting

10. Changes to recent versions
11. Imprint
Operation Manual 'Stereoping Synth Controller'
V1.2 - 12.2014
© Stereoping Germany, Hattingen 2014