Table of Contents
Advertisement
LCD Messages
Message
Unrecognized file
format
Card is write protected
internally
Card is locked. (Insert
new card.)
Card is protected.
(Reset switch on
card.)
Card is unusable.
(Insert new card.)
56
Chapter 8
Cause
The camera cannot
read the picture format.
Access lock was added
using software.
Lock switch on side of
card is in Locked
position.
Card voltage must
range between 3.0 and
3.6 volts.
Solution
Transfer the unreadable
picture to the computer
(page
43), or delete the
picture
(page
26).
Use software to remove
lock; cannot be removed by
the camera.
Slide lock switch to remove
write protection.
Replace the card.
Advertisement
Table of Contents
Troubleshooting
