Using The Drive Button - Kodak EASYSHARE Z812 IS User Manual

Using the Drive button

Mode Icon(s)
Self-timer
Burst
Exposure
Bracketing
Normal (none)
Using the self-timer
To cancel the Self-timer before the picture is taken, press the Drive button. (The
Self-timer setting remains active.)
Use the same procedure to take a video, but:
Turn the Mode dial to Video
■
■ Press the Shutter button completely down.
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
www.kodak.com/go/support
10 2
2X
Place camera on a tripod or flat surface.
In any Still mode, press the Drive button.
• Once for a 10-sec. delay (so you have time to get into the scene)
• Again for a 2-sec. delay (for a steady, shutter release on a tripod)
• Again for 2 pictures (after a 10- and 18-second delay)
Compose the scene.
Press the Shutter button halfway, then completely down.
.
Purpose
See Using the self-timer
See page 12
See page 13
Normal picture taking
The picture is taken after the delay.
Taking pictures/videos
11