Kodak EASYSHARE Z980 Extended User Manual page 63

If
Camera does not
recognize
SD/SDHC Card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full.
Memory card and
internal memory
full.
The Reset Camera
feature did not
take effect.
Pictures taken on a
tripod are blurry.
Cannot delete
some pictures.
Pictures that have
KODAK PERFECT
TOUCH
Technology
applied (twice) are
of lower image
quality.
www.kodak.com/go/support
Try one or more of the following
■
Purchase a certified SD/SDHC Card.
■
Format the card
CAUTION: Formatting a card deletes all pictures and videos,
including protected files.
■
Insert a card into the slot, then push to seat
■
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
■
Insert a new card
page 48), or delete pictures
■
Transfer pictures to the computer
or internal memory
CAUTION: Formatting a card deletes all pictures and videos,
including protected files.
■
After using the Reset Camera feature
off and then on again.
■
Occasionally, a tripod interferes with the camera's image stabilizer. In
the Setup menu, set Image Stabilizer to Off
■
If a picture is tagged as a Favorite, a Protect tag is automatically
applied (and remains even if the Favorite tag is removed). A protected
picture cannot be deleted unless the Protect tag is removed
page 25) or the card/internal memory is formatted
■
If PERFECT TOUCH Technology has been applied to a picture on the
camera, do not apply it again when the picture is on the computer (or
on a KODAK Picture Kiosk).
NOTE: PERFECT TOUCH Technology is automatically applied to pictures taken
in Smart Capture mode.
(see page 46).
(see page 5), transfer pictures to the computer
(see page
(see page
(see page 46).
Troubleshooting
(see page 5).
24).
48), then format the card
(see page 45), turn the camera
(see page 44).
(see page
(see
(see
46).
57